Xray T1 Instruction Manual - page 2
1
XRAY T1 Factory Kit 2005
R/C & BUILDING TIPS
ADDITIONAL ITEMS REQUIRED:
The new XRAY T1 Factory Kit '05 (T1FK'05) is the 5th generation of
XRAY's extremely successful T1 family of 1/10-scale on -road electric
touring cars. The T1FK'05 is a large evolutionary leap forward,
blending a brand new chassis platform and completely redesigned
drive train with race-proven geometry. The extraordinary materials
and racecar lineage combine to offer a responsive ride, luxurious
elegant design, finest quality, and best track performance. With the
highest number of adjustments to achieve the most performance
out of any track condition, the T1FK'05 is a top-competition racecar
of the next level of performance.
The T1FK'05 is the best-balanced touring car with the world's
narrowest chassis. The new optimized layout concentrates more
weight closer to the centerline of the chassis, giving improved
traction, cornering speed, and steering on all surfaces. The
redesigned drive train achieves even higher efficiency. The
super-efficient C-hub suspension is retained from the predecessor
T1 Factory Kit, using short-arm suspension components for superb
handling.
Many new and updated features are present on the T1FK'05 to
optimize performance, while reducing unnecessary weight and
rotating mass without compromising strength and long life. All
of these components combine to make the highest-performance,
best-handling electric touring car in the world.
We have made every effort to make these instructions as easy to
understand as possible. However, if you experience any difficulties
or problems with this product, or have any questions, please
contact the XRAY support team at support@teamxray.com and we
will be very happy to assist you. Please visit our official Web site at
www.teamxray.com, where you will find all the latest updates, setup
information, option parts, and many other goodies.
We at XRAY take great pride on providing the best possible service
and car to all of our customers.
• Read and fully understand the instruction manual before
building.
• Always keep this instruction manual ready at hand for quick
reference, even after completing the assembly.
• Clear a work area for assembling the kit.
• Work on a light-colored towel so any dropped parts are easy
to find.
• Only open bags of parts for the assembly section you are
building; do not open parts bags before required.
• Make sure all screws are tight, and check them periodically.
Make sure the chassis screws do not protrude below the
chassis.
• For best performance, it is very important to ensure the free
movement of all parts.
• Tap or pre-thread composite parts when threading screws.
• Self-tapping screws cut threads into the parts when tightened.
Do not use excessive force when tightening self-tapping screws,
or you may strip out the thread in the plastic. We recommend
you stop tightening a screw when you feel some resistance.
• Use medium-grade (blue) threadlock on screws that thread into
metal parts.
Please support your local hobby shop, and ask them for
advice. We at XRAY Model Racing Cars support all local hobby
dealers. We ask you to purchase XRAY products at your hobby
dealer whenever possible, and give them your support as we
do. If you have difficulty finding XRAY products, please visit us
at www.teamxray.com for advice, or contact us via e-mail at
support@teamxray.com, or contact the XRAY distributor in your
country.
Radio system (transmitter and receiver), steering servo, speed controller, motor, pinion gear,
battery pack (6-cell), battery charger, 1/10-scale bodyshell (190 mm), tires, inserts, high-
strength fibre tape, double-sided tape, CA glue, bearing oil, medium-grade (blue) threadlock.
Receiver
Steering Servo
Speed Controller
6-cell Battery Pack
(Inline)
Pinion Gear
and Setscrew
Tire Inserts
Tires
190mm Bodyshell
Electric Motor
TOOLS REQUIRED:
Cutting Pliers, Needlenose Pliers, Snap Ring Pliers, Allen Wrenches (1.5 mm, 2.0 mm, 2.5 mm, and 3.0 mm), Hobby Knife, Caster Clip Removal Tool,
Turnbuckle Wrench, Shock Assembly Tool, Vernier Calipers (digital recommended), Soldering Iron and Solder.
For ease of assembly, we strongly recommend using high-quality HUDY tools. Visit www.hudy.net for more information on the entire range of HUDY products.
In line with our policy of continuous product development, the exact specifications of the kit may vary. In the unlikely
event of any problems with your new kit, you should contact the model shop were you purchased it, quoting the part
number. We reserve all rights to change any specification without prior notice. All rights reserved.
Fibre Tape