Xsense Connectivity GE-1000 User Manual - Copyright
Copyright
Copyright © 2000 by Xsense Connectivity, Inc. All rights reserved. No part of
this documentation may be reproduced in any form or by any means or used
to make any directive work (such as translation or transformation) without
permission from Xsense Connectivity, Inc. Xsense Connectivity, Inc. reserves
the right to revise this documentation and to make changes in content without
obligation among Xsense Connectivity, Inc. to provide notification of such
revision or change.
All products and their associated features are subject to change or upgrade
at the time of the shipment or of the sales.
FCC Notice
This equipment has been tested and found to be FCC Rules certified. These
restrictions are designed to provide protection against harmful interference
from residential installations. This equipment generates radio frequencies
that may cause interference with radio communications if not used in
accordance with the instructions. Interference may even occur during proper
installation. If this equipment causes interference, the user is suggested to
correct the it by one or more of the following:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit that is separate from
the one to which the receiver is connected.
4. Consult the dealer or an experienced radio/television technician for
help.
CE Declaration of Conformity
The equipment complies with the requirements relating to electromanetic
compatiblity, the essential protection requirement of Council Directive/EEC on
the approximation of the Member States relating to Electromangnetic
compatibility.
Trademarks
All products and brand names are trademarks and/or registered trademarks
of their respective companies.
I