Xstatic Pro Lightning X-PAR5In1-9 IRC User Manual - Infrared Remote Functions:
11
INFRARED REMOTE FUNCTIONS:
8. INFRARED REMOTE OPTIONS
Your fixture comes with an Infrared Remote Control.
This requires aiming the remote forward and at the
face of the light in order to send it your selections.
The remote has two sections of control, settings and
colors. Each has the associated mode it will enter
upon pressing. They are:
ON/OFF
All LEDs to On or Off state
AUTO
Auto/Demo Mode
PRG
Select Pre-Programmed Scenes
SOUND
Sound Reactive Settings
SPEED
Rate at which Colors Change
STROBE
Flash On/Off and Freq. Settings
DIMMING
Enter Dimming Mode
+ / -
Increase or Decrease Selection
On Buttons 0-9, the LEDs will display the associated colors when selected.
0
1
2
3
4
5
6
7
8
9
Cyan
Purple Purplish-
Red
Orange
White
Bright
Pink
Light
Grreen
Water
Blue
Yellow
Warm
Sunset
DIMMING MODE
By selecting DIMMING and then a Color Button labeled with either R, G,
B, A, or W, you can create your own color mix by increasing or decreasing
the value of that single color portion of the 5 in 1 LED. These buttons are
outlined on the remote in the form of a “T” shaped box.
Using the Settings Chart for Color Value Mixing on page 7, you can control
the fixture in the same manner again, by first pressing Dimming, and then
Selecting the lettered color buttons, and then + or - to increase or decrease
the values.