2 high power indoor bar washer, 240 rgb led user manual.
3 caution! Read before use! For your own safety, please read this user manual carefully before you initially power up your fixture. ● examine packaging to ensure all parts included ● disconnect all power and other cables prior to servicing ● always make sure to provide adequate ventilation ● keep th...
4 features: ● rgb color mixing ● color strobe effect ● color mix effect programs ● led chases (adjustable speeds) ● electronic dimming 0-100% ● operating modes: sound active, master / slave, or dmx-512 control protocol ● dmx channel modes: 2, 3, 4, 7, 14, or 26 ● digital display for address and func...
5 dmx control and chain connections: you can connect the dmx-output of a controller directly to the dmx-input of the fixture. If connecting mulitple units, be sure to use the proper cabling. Termination note: these units are not self terminating. If the last fixture in the dmx chain will need to be ...
6 menu / controls: setup menu: you can easily setup and control your 240 rgb led bar from the on-board lcd screen. Using the menu, setup, up and down buttons, you will find the following options to select and modify: led display operation - these instructions will provide access to the setup and con...
7 3. Dimming mode press the mode button until colr displays on the menu screen. Then repeatedly pressing the setup button will scroll through 4 selections, red ( r ), green ( g ), and blue ( b ). Each of the r, g, and b selections have 0-255 levels of dimmer. Menu options cont’d: 4. Sound mode - thi...
8 slave mode menu map 8. Restore factory settings when fixture is off, press the mode and setup buttons at the same time and hold while turning the fixture power on. Hold the buttons until rset displays and flashes on the menu screen. 7. Slave mode menu options this menu map details dmx setting opti...
9 dmx channel modes setup.
10 dmx channel modes setup.
11 dmx setup control: [to make terminator; solder a 120 resistor between signal (–) and signal (+) into a 3-pin xlr-plug and plug it in the dmx-output of the last fixture.] note: the last or final fixture in the dmx chain must have a terminator plug. A terminator is an xlr type plug that does not co...
12 dmx setup:.
13 care:.
15 ir remote control: on buttons 0-9, the leds will display the associated colors when select- ed. 0 1 2 3 4 5 6 7 8 9 white red amber yellow1 green cyan blue purple pink yellow2 dimming mode by selecting manual and then a color button labeled with either r, g, or b, you can create your own color mi...
(no direct sales, dealers and distributors only) please register your product warranty on proxdirect.Com, submit your testimonials and setup photos to our website, & tag us on your social media websites. #proxdirect.
