Xstatic X-240BAR RGB User Manual - Menu / Controls:
6
MENU / CONTROLS:
SETUP MENU: You can easily setup and control your 240 RGB LED Bar
from the on-board LCD screen. Using the MENU, SETUP, UP and DOWN
buttons, you will find the following options to select and modify:
LED DISPLAY OPERATION - These instructions will provide access to the
setup and control of the DMX light.
1. AUTO MODE
Press the MODE button until
AUTO
displays on the Menu screen. The fixture
comes with 24 built-in programs titled
Pr.02 - pr.24
where the user can
set the operation speed and strobe speed. The presets will run in loop until
stopped.
CHOOSING COLORS:
To select a Static Color, press the MODE button until you see
Pr.0 1
. Then
using SETUP and UP or DOWN buttons to choose betwen colors.
For setting the Operation Speed you can scroll through
SP.0 1
to the highest
speed at
Sp.fl
(1-100). Press SETUP again to control the Strobe Speed from
f500
to
f599
.
2. BUILT-IN PROGRAM SELECTION
You can access several levels of programs and different styles by setting
the program number, then pressing SETUP button to select programming
options.
To acces the pre-saved programs, press the MODE button until you
see
Pr.0 1
. Then use UP or DOWN buttons to choose betwen programs titled
Pr.02 - pr.24.
When in the selected program number, pressing SETUP again
allows you to set the Operation Speed. You can scroll through
SP.0 1
to the
highest speed at
Sp.fl
(1-100). Press SETUP again to control the Strobe
Speed from
f500
to
f599
.
The Control Screen with
MENU, SETUP, UP, and
DOWN Navigation buttons.