XTA D2 Operator's Manual - page 15
D2
Operators Manual
Page 15
Specifications
Inputs: 2 electronically balancedu
Impedance: > 10k ohms.
CMRR : >65dB 50Hz - 10kHz.
Outputs: 2 electronically balancedu
Source Imp:
Min. Load: 600ohm
Max. Level: +20dBm into 600 ohm
Frequency Resp.:+½dB 20Hz-20kHz
Dyn Range:>110dB 20Hz-20k unwtd
Distortion:
Dynamic EQ Bands:
Threshold: -30dBu to +22dBu
Ratio: 1:1 to 16:1
Attack: -60uS to 250mS
Release: 25mS to 4 S
Make-up Gain: 0 to +15dB
Sidechain EQ Section
Type: Selectable high/low shelf or
narrow/wide parametric response.
Centre/corner Freq: 20Hz to 20k
Gain: +6,9 or 15dB and ‘Off’
Sidechain monitor available.
Input/Output meter: 6 point,
-12dBu to +18dBu.
Gain Reduction meter: 4 x 6 point,
1dB to 15dB gain reduction.
Connectors
Inputs: 3 pin female XLR
Outputs: 3 pin male XLR.
Power: 3 pin IEC
Power: 60 to 250V
±
15% @
50/60Hz.
Consumption:
Weight: 3.5kg. Net (4.8kg. Shipping)
Size: 1.75"(1U) x 19" x 11.8"
(44 x 482 x 300mm) excluding
connectors.
Options
u
= Transformers available.
Optional Interfaces AES/EBU Digital Input/Output
Due to continuing product improvement the above specifications are subject to change.