XTA GQ600 Operator's Manual - page 8
Rear Panel Functions
1.
Mains Power - is connected via a standard IEC socket. A compatible power cord is
supplied with the unit.
2.
Mains Fuse - is located in a finger-proof fuseholder adjacent to the mains inlet. Always
replace this fuse with the correct type as shown on the rear panel legend.
3.
Power Switch - a double pole rocker switch isolates both live and neutral connections.
4.
Voltage Selector - switches between two nominal operating voltages. Please ensure
this is set for the correct voltage before operating the unit. Disconnect power to the unit
before resetting this selector.
5.
XLR Inputs and Outputs - separate 3 pin XLR connectors are provided for each audio
input and output. All terminations are fully balanced where pin 2 = Hot, pin 3 = Cold
and pin 1 = Screen (shield). See page 8 "Grounding" for more information.
6.
Klippon Inputs and Outputs - a six pin Klippon socket is also provided for each
channel. The corresponding plug features screw terminals allowing quick termination of
system wiring, giving the advantages of barrier strip plus the bonus of easier servicing
and the ability to pre-wire. Each connector carries input and output connections with all
terminations fully balanced, where H = Hot, C = Cold, S = Screen (shield).
7.
Safety Ground Screw - Do Not Remove.
GQ600 Page 6