Xterra 16204791500 Owner's Manual - Fb150 Console
customerservice@dyaco.ca
Dyaco Canada Inc 2017
13
OPERATION OF YOUR FOLDING BIKE
GETTING FAMILIAR WITH THE CONTROL PANEL
FB150 CONSOLE
Key Functions
FUNCTIONAL BUTTON:
MODE – Push down to select functions.
– Push down to reset time、distance、calories ODO and pulse for 4 seconds.
FUNCTIONS AND OPERATIONS
1. SCAN: Press MODE button until “▼” appears at SCAN position, monitor will rotate through the following
functions: speed、distance、time、calorie、ODO and pulse, each display will be hold 4 seconds.
2. TIME: Shows your elapsed workout time up to 99:59. Counts down from your preset target time to 0:00 during
your workout.
3. SPEED: Display current speed. The maximum value is 999.9 M/H
4. DISTANCE: Count the distance from exercise start to end. The maximum value is 99.99 MILE/KM.
5. CALORIE: Count the total calories from exercise start to end. The maximum value is 999.9
6. ODOMETER:Monitor will display the total accumulated distance. The maximum value is 999.9 MILE/KM.
7. PULSE RATE: Press MODE button until “▼” appears at PULSE position.
Before measuring your pulse rate, please place your palms of your hands on both of your contact
pads and the monitor will show your current heart beat rate in beats per minute(BPM) on the LCD
after 6~7 seconds.
Remark: During the process of pulse measurement, because of the contact jamming, the measurement value may
be higher than the virtual pulse rate during the first 2~3 seconds, then will return to normal level. The
measurement value cannot be regarded as the basis of medical treatment.
NOTE:
1. If the display is faint or shows no figures, please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes.
3. The monitor will be auto‐powered on when starting to exercise push button w/signal in.
4. The monitor will automatically start calculating when you start to exercise and will stop calculating
when you stop exercising for 4 seconds.