Y-cam Black Quick Installation Manual - Check Your Pc System
2
Check your PC system
A PC is required for initial setup only and once the camera is configured, it can be
used independently without being connected to a computer.
Your computer and the network must meet the following technical specifications for
the Y-cam Black to work properly:
•
Processor: Intel Pentium III, 800MHz or Higher
(Pentium IV, 2 GHz or Higher recommended)
•
RAM: 128 MB or more
•
Colour Monitor: Minimum resolution 800x600 and the latest driver for the
display adapter
•
OS (Operating System): Windows 2000/XP/Vista
•
Web Browser: Internet Explorer Version 5.5 or above
•
Interface: 10/100 Mbps Ethernet card
•
Wireless router for wireless connectivity
A. Using a standard network cable, connect the Y-cam to your network (usually directly
into your router however, depending on your own setup this may be to your switch.)
B.
Connect the included power adapter to the power port on the camera and the other
end into an electrical socket.
Note: Check that the power indicator is lit red on the front of the camera.
Internet
Modem
*
Router
*
Wired Connection
Wireless Connection
1. Connecting the Y-cam to your network
Setup diagram:
Fig 1.1
*
Please note some users may have a combined modem and router,
in which case the local setup will differ slightly from the diagram above.