Y-cam HomeMonitor HD Pro Quick Start Manual - page 9
9
7
4
6
5
9
Connect the cable from the camera to the cabling
in step 2
(See picture 4)
Please make sure the power connector is pushed
in securely
Position the cable from the base of the camera
through the base of the stand and insert any
extra cable in to the stand
(See picture 5)
Turn the camera and stand anti-clockwise and
place over the stand cap, and then turn clockwise
to lock in to place
(See picture 6)
If you have any issues locking the stand in to place,
make sure the cable from the camera going in to
the base is not preventing the stand from locking
in to place.
Insert the stand cap screw and tighten it to
firmly secure the camera and stand to the wall
(See picture 7)
Readjust the cameras ball joint to capture the
desired view. Affix any loose cabling to the wall.
Having issues? Our tech support specialists are on hand to help - visit
http://support.homemonitor.me