Summary of BT53328
Page 2: Table of Contents
Table of contents 1. Introduction ...................................................................................................................................................................................1 2. Package contents ....................................................................
Page 3: 1. Introduction
1 please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an exper...
Page 4: 2. Package Contents
2 1. 3.5” or 4.3” dash monitor or 3.5” mirror monitor 2. Weatherproof rearview camera 3. Windshield mount for dash monitor only 4. 12v/24v power adaptor 5. Hardwire power cable for dash monitor or 3.5” mirror monitor (optional) 6. Hook and loop straps for mirror monitor only 7. 4x snap lock splice c...
Page 5: 3. Product Specifications
3 digital wireless backup camera with dash monitor 1. 3.5” or 4.3” tft lcd display 2. 2.4ghz digital wireless 3. Image sensor: cmos 4. Operation range: 30 feet/10 meters 5. Input voltage dc12~24 6. Operation temperature: 14~122ºf 7. Storage temperature: -4~140ºf 8. Camera water resistance: ip67 rati...
Page 6
4 original rearview mirror. Tip: use both hands on either side of the mirror to snap into place evenly. Make sure the mirror is centered before snapping into place. 6. Once the yada mirror is in place, reach behind and one by one reattach the hook and loop straps together to hold the yada mirror tig...
Page 7
5 backup camera installation note: camera installation on diesel vehicles may require different wiring install. See below. You can also watch some common installation videos at www.Letsyada.Com for more information. Caution: this unit is designed to operate on a 12v/24v dc negative ground electrical...
Page 8
6 11. Replace the light socket back into the reverse light housing. 12. Replace any interior panels that may have been removed to access the taillight and close your trunk or rear hatch. 13. Standing with the license plate in one hand and the camera in the other hand, slide the camera along the top ...
Page 9: 5. Pairing And Connecting
7 pairing is not necessary as the unit has already been paired. If you are not able to connect the camera, please try to pair the camera by the following steps: 1. Go to the monitor and do the following step: a. Press “menu” b. Go to “pair camera” c. Press “parking aid line” to confirm d. The unit i...
Page 10: 7. Settings
8 you can adjust the contrast and brightness of the monitor according to your desired level. Note: contrast and brightness setting only works while the backup image is on the screen. To adjust contrast 1. Press “menu” 2. Go to “contrast” by pressing “ – “ 3. Press “parking aid line” to enter 4. Pres...
Page 11
9 from actual conditions. Objects viewed in the rear view monitor differ from actual distance because a wide-angle lens is used. Objects in the rear view monitor will appear visually opposite than when viewed in the rear view and outside mirrors. Use the inside mirror or glance over your shoulder to...
Page 12
10 the system may not operate normally. The digital camera can withstand the effects of rain, snow, and inclement weather. • when strong light directly enters a camera, objects may not be displayed clearly. • the screen may flicker under fluorescent light. • the colors of objects on the rear view mo...
Page 13: 9. Maintenance & Warranty
11 cleaning • if dirt, rain or snow attaches to the camera, the monitor may not clearly display objects. If water droplets, snow or mud adhere to the camera lens, rinse with water and wipe with a dry cloth. • do not use alcohol, benzene or thinner to clean the camera. This will cause discoloration. ...
Page 14
12 installation, removal or reinstallation of the product, or damage to any mobile phone device or vehicle. Owner’s responsibilities: winplus north america will make every effort to provide warranty service within a reasonable period of time. Should you have any questions about service received or i...
Page 15
13 field of vision and does not provide a comprehensive view of the rear area of the vehicle. You should always look around outside your vehicle and use your mirrors to confirm rearward clearance and that your vehicle can back up safely. Winplus north america and/or its affiliates are not responsibl...
Page 16
14 1. Include a copy of your sales receipt or bill of sale with your unit when it is returned for warranty service. 2. If it is necessary to return your product for service, please return it securely packed, preferably in the original shipping box, and freight and insurance prepaid to the following ...
Page 17: 10. General Information
15 customer service/contact for questions or issues regarding the product, please visit www.Letsyada.Com or contact winplus in your area/region to speak to our customer service representative: winplus north america tel.: 866-294-9244 tel.: 909-752-3074 winplus europe tel.: 44-1440-7138888 winplus au...
Page 18
16 • reorient or relocate the receiving antenna • increase the separation between the equipment and receiver • connect the equipment into an outlet on a circuit different from that to which the receiver is connected • consult the dealer or an experienced radio/tv technician for help this device comp...
Page 19
17 important note: fcc radiation exposure statement: this equipment complies with fcc radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying rf exposure compliance. This transmitter must not be co-located or opera...
Page 20
Ml-53328_v2 www.Winplus.Com www.Letsyada.Com © 2014 winplus north america inc. All rights reserved. Winplus, the logo design, and yada® are trademarks or registered trademarks of winplus north america inc. North america europe australia new zealand asia 820 south wanamaker avenue, ontario, ca 91761 ...