Summary of BT54358-2
Page 2: Table of Contents
Table of contents 1. Introduction ...............................................................................................................................................................................1 2. Package contents ........................................................................
Page 3: 1. Introduction
1 please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an exper...
Page 4: 2. Package Contents
2 1. 5” dash monitor 2. 1 backup camera 3. 12v/24v power adapter for monitor 4. Hardwire cable for monitor 5. Suction cup mount for monitor 6. Install kit 7. User’s manual 8. Quick install guide 2. Package contents 1. 2. 6. 7. 8. 3. 5. 4..
Page 5: 3. Product Specifications
3 1. Frequency: 2.4ghz 2. Operating voltage: dc 12v / 24v 3. Operating temperature: -10~+50°c 4. Maximum signal range: 30 feet/10metres (without interference or obstruction) 5. Camera water resistance: ip67 rating dash monitor installation 1. Stick the suction cup mount on the windshield and adjust ...
Page 6
4 also watch some common installation videos at www.Letsyada.Com for more information. Caution: this unit is designed to operate on a 12v/24v dc negative ground electrical system. Connecting to other types of electrical systems will cause damage to your vehicle. Please contact the manufacturer if yo...
Page 7
5 10. Use the provided zip ties to secure wires neatly within your car. 11. Replace the light socket back into the reverse light housing. 12. Replace any interior panels that may have been removed to access the taillight and close your trunk or rear hatch. 13. Standing with the license plate in one ...
Page 8: 5. Settings And Operation
6 5. Settings and operation power on/off • the dash monitor will automatically turn on when it is connected to a power source. • hold the power button to turn on/off the unit if necessary. Connection and view selection • the backup camera that is included in this system is set as the default camera ...
Page 9
7 brightness and contrast you can adjust the contrast and brightness of the monitor according to your desired level. Note: contrast and brightness setting only works while the camera image is on the screen. To adjust brightness 1. Press “menu” 2. Go to “brightness” by pressing “– “ 3. Press “parking...
Page 10
8 pairing the yada backup camera (camera 1) included with this expandable system is already paired with the monitor. If you can not see the camera image, pair the camera with the following steps: 1. Turn on your vehicle and place in reverse gear. This will power the monitor and the camera. 2. On the...
Page 11
9 a. Press “menu” b. Go to “pair camera” and select “camera 2” c. Press “parking aid line” to confirm d. The unit is now in pair mode - if the monitor is able to connect with the camera, the display will show “pair ok”. If no camera is found, then the display will show “pair fail”. If you receive a ...
Page 12: 6. Safety Information
10 warning: a failure to read and follow these warnings and instructions may result in a serious accident, including damaged property or a serious injury, including loss of life. • the backup camera expandable system is designed as an aid to the driver in detecting large stationary objects to help a...
Page 13
11 opposite than when viewed in the rear view and outside mirrors. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. • the backup camera “night vision” feature is an aid to a driver but is limited. Always use your own eyes to confirm the vehicle’s surro...
Page 14
12 • do not submerge camera in water, which can cause internal damage to the camera. • if the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally. The digital camera can withstand the effects of rain, snow, and inclement w...
Page 15: 7. Maintenance & Warranty
13 cleaning • if dirt, rain or snow attaches to the camera, the monitor may not clearly display objects. If water droplets, snow or mud adhere to the camera lens, rinse with water and wipe with a dry cloth. • do not use alcohol, benzene or thinner to clean the camera. This will cause discoloration. ...
Page 16
14 due to normal wear and tear. 5. Repair or replacement parts supplied by winplus north america under this warranty are protected only for the unexpired portion of the original warranty. 6. This is a “repair or replace” warranty only, and does not cover the costs incurred for the installation, remo...
Page 17
15 winplus north america and/or its affiliates do not guarantee or promise that the user of backup camera expandable system will not be in an accident or otherwise not collide with an object and/or person. Our backup camera expandable system is not intended in any way to be a substitute for careful ...
Page 18
16 and workmanship for 12 months from the date of original purchase. Where permitted by law, winplus liability shall be limited to that set forth in this limited express warranty. This limited express warranty shall be the exclusive remedy of the purchaser and winplus makes no other warranty of any ...
Page 19: 8. General Information
17 customer service/contact for questions or issues regarding the product, please visit www.Letsyada.Com or contact winplus in your area/region to speak to our customer service representative: winplus north america tel.: 866-294-9244 tel.: 909-752-3074 winplus europe tel.: 44-1440-7138888 winplus au...
Page 20
18 • connect the equipment into an outlet on a circuit different from that to which the receiver is connected • consult the dealer or an experienced radio/tv technician for help this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device ...
Page 21
19 important note: ic radiation exposure statements: this equipment complies with ic radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying rf exposure compliance. This transmitter must not be co-located or operat...
Page 22
Www.Winplus.Com www.Letsyada.Com © 2014 winplus north america inc. All rights reserved. Winplus, the logo design, and yada are trademarks or registered trademarks of winplus north america inc. The bluetooth ® word mark and logos are owned by the bluetooth sig, inc. And any use of such marks by winpl...