Summary of YD-V43
Page 1
Rearview mirror backup camera & speakerphone.
Page 2: Table of Contents
Table of contents specifications 1 package contents ...
Page 3: Specifications
1 • 2.4” color tft lcd monitor • 2.4ghz wireless technology • image sensor: cmos, 640x480 pixel • bluetooth® spec.: v2.1 • weight: 380g • phonebook capacity: 950 entries • profiles support: headset, handsfree, avrcp & opp • operating range: 10 meters • input voltage: dc10~13.5v • noise / echo reduct...
Page 4: Package Contents
2 a – mirror b – hook and loop strap (2) c – 12v power adapter d – hard wire power adapter e – backup camera f – rubber ring grommet g – signal booster power cable h – scotchloks (4) i – cable ties (4) j – wireless signal booster k – hook and loop package contents a b c d e f g h j i k.
Page 5: Prior To Installation
3 read all the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an experienced tec...
Page 6
4 • the area displayed by the rearview mirror vehicle back-up camera with bluetooth® hands-free speakerphone system is limited. The rearview mirror vehicle back-up camera with bluetooth® hands- free speakerphone system does not display objects that are close to or below the bumper, underneath the ve...
Page 7: Installation Instructions
5 installation instructions mirror installation – uses parts a thru d 1 attach black hook and loop straps (part b) to the back of the yada mirror by sliding the metal clip into the mirror brackets. Push in all the way until the straps are secure. 2. Make sure the connection for each strap is facing...
Page 8
6 7. At this time you can trim off any excess strap with a scissor. 8. Remove the yada mirror protective overlay. 9 now power the mirror. A. 12v power adapter i. Take the 12v power adapter (part c) and plug in adapter to top of the yada mirror. Plug other end into 12v power port in your car. B. Har...
Page 9
7 power cable (part g) into the wireless signal booster. D. Determine the best place to mount the signal booster. Now it is time to install the camera 5 remove your license plate 6. Determine the best route for the camera cable from the top of your license plate to the signal booster. You may need ...
Page 10
8 8. Plug the attached wire from the camera into the wireless signal booster (part j). Ensure that the wires are not tangled. 9 you are now ready to test the camera. 10.While sitting in the driver’s seat of the car with the key in the accessory position, turn on the rearview mirror by pressing the ...
Page 11: Warranty / Liabilities
9 winplus north america limited warranty winplus north america warrants, to the original purchaser, that its products are free from defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, winplus north america’s liability shall be limited to that se...
Page 12
10 for customer service and technical support, please call us at 1.866.294.9244 or email us at customercare@ winplususa.Com. If at that time it is determined that a replacement unit is needed, the support representative will issue a return authorization and instruct on how to get a new unit. Winplus...
Page 13
11 winplus europe limited warranty winplus warrants, to the original purchaser, that its products are free from defects in material and workmanship for 12 months from the date of original purchase. Where permitted by law, winplus liability shall be limited to that set forth in this limited express w...
Page 14: Operations
12 a. Power on/off • yd-v43 will automatically turn on when it is connected to a power source • hold to turn yd-v43 on/off • when turned on, yd-v43 will enter search mode connecting • to search again, press once to activate search mode note: for automatic connection, please make sure bluetooth® mode...
Page 15
13 follow the steps below to pair your yd-v43 with your mobile phone: • power on the device • press and hold m for 2 seconds • screen will indicate pairing mode note: yd-v43 is now in pairing mode • activate the bluetooth® settings of your mobile phone note: the following steps are general procedure...
Page 16
14 c. Phonebook yd-v43 rearview mirror speakerphone can store up to 950 phone numbers. If you are trying to transfer 1100 contacts to the yd-v43, only the first 950 contacts will be successfully transferred. At command and opp (object push profile) function can automatically transfer the contacts in...
Page 17
15 • press to enter the sub-menu • press +/- to select delete contacts and press to confirm • lcd will display [yes] [no] • select [yes] and press to confirm • lcd will display pb deleted when phonebook is cleared note: yd-v43 does not allow deleting of a single entry, all entries will be deleted af...
Page 18
16 to adjust call volume during a call: • press +/- to adjust the volume during a call if you cannot hear the person you are talking to on the other line, do the following steps while conversation is in progress: • request the person on the other line to adjust his/her mobile phone’s volume level to...
Page 19
17 last number re-dial: • press once • press +/- until you find the desired number (total 20 records including missed calls, outgoing & incoming calls) • press again to dial to make a call using the speed dial function: • press and hold m , + or - for 2 seconds • phone will automatically dial the nu...
Page 20
18 caller id can be displayed in 3 ways: a) by name & phone number yd-v43 can display the caller’s name when receiving call. To display caller’s name, the name must be stored in the phonebook b) by phone number phone number will be displayed if there is no record of that number in the phonebook c) w...
Page 21: Led Indication
19 button functions and operation led indication button function operation m go to menu press 1 time dtmf (dial tone modulation frequency) press and hold for 2 seconds (activated only when the line is connected) quick dial press and hold for 2 seconds pairing press and hold for 2 seconds (screen sho...
Page 22
20 safe operating tips • if you replace the tires, the area displayed on the monitor may change and you may need to adjust the camera. • there is a plastic cover over the camera. Do not scratch the cover when cleaning dirt or snow from the cover. • the camera has a water resistant construction. Do n...
Page 23
21 • know where children are. Have children stand in a place where they are in full view. • be aware of young children. Young children are small and hard to see. • parents, caregivers and all adults need to be vigilant in supervising children, especially when children are in the yard, driveway or pa...
Page 24: Customer Service / Contact
22 for questions or issues regarding the product, please visit www.Letsyada.Com or contact winplus in your area/region to speak to our customer service representative: winplus north america tel.: 866-294-9244 tel.: 909-752-3074 winplus europe tel.: 44-1440-713888 winplus australia tel.: 61-3-9720-41...
Page 25
23 could void the user’s authority to operate this equipment. Important note fcc radiation exposure statement: this equipment complies with fcc radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying rf exposure co...
Page 26
Www.Winplus.Com www.Letsyada.Com © 2011 winplus north america inc. All rights reserved. Winplus, the logo design, and yada are trademarks or registered trademarks of winplus north america inc. The bluetooth ® word mark and logos are owned by the bluetooth sig, inc. And any use of such marks by winpl...