Yaesu FT-950 Manual

Other manuals for FT-950: Brochure & Specs, Reference, Operating Manual, Technical Supplement

Page of 15

Download

Print this page

Bookmark us

Page 104

FT-950 O

PERATING

ANUAL

ENU

ODE

The Menu system of the FT-950 provides extensive customization capability, so you can set up your transceiver just the

way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “001 AGC

001 AGC

FST DLY

” to “118 TGEN EMRGNCY

118 TGEN EMRGNCY

”.

SING

THE

ENU

1. Press the [MENU] button momentarily, to engage the

Menu mode.

The display will show the Menu Number, Menu Group

Name, and Menu Item. Press the [SELECT] knob

momentarily to toggle the display between “Menu

Number & Menu Group Name” and “Menu Item”. The

Multi-Display Window shows the current setting of the

currently selected Menu item.

2. Rotate the [SELECT] knob to select the Menu item

you wish to modify.

3. Rotate the [CLAR/VFO-B] knob to change the cur-

rent setting of the selected Menu item.

DVICE

Press the [CLEAR] button (located the upper right of

the [SELECT] knob) momentarily to reset the selected

Menu item to the factory default value.

4. When you have finished making your adjustments,

press and hold in the [MENU] button for one second

to save the new setting and exit to normal operation. If

you only momentarily press the [MENU] button, the

new settings will not be retained.

ENU

ODE

ESET

You may reset all the Menu settings to their origi-

nal factory defaults, if desired.

1. Turn the front panel [POWER] switch off.

2. Press and hold in the [MENU] button, and while

holding it in, press the [POWER] switch to turn

the transceiver back on. Now release the

[MENU] button.

[CLAR/VFO-B] Knob

[MENU] Button

Press

Menu Number

Menu Group Name

Menu Setting

Menu Item

Menu Setting

[SELECT] Knob

[CLEAR] Button

1 2 3 4 5 6 7 Next › »

Summary of FT-950

Page 1
Page 104 ft-950 o perating m anual m enu m ode the menu system of the ft-950 provides extensive customization capability, so you can set up your transceiver just the way you want to operate it. The menu items are grouped by general utilization category, and are numbered from “001 agc 001 agc 001 agc...
Page 2: Enu
Page 105 ft-950 o perating m anual m enu m ode g roup n o . M enu f unction a vailable v alues d efault s etting agc 001 agc fst dly 20 ~ 4000 msec (20 msec/step) 300 msec agc 002 agc mid dly 20 ~ 4000 msec (20 msec/step) 700 msec agc 003 agc slw dly 20 ~ 4000 msec (20 msec/step) 3000 msec display 0...
Page 3: Enu
Page 106 ft-950 o perating m anual g roup n o . M enu f unction a vailable v alues d efault s etting mode-data 050 data dt gain 0 ~ 100 50 mode-data 051 data out lvl 0 ~ 100 50 mode-data 052 data vox dly 30 ~ 3000 msec (10 msec/step) 300 msec mode-data 053 data v gain 0 ~ 100 50 mode-data 054 data p...
Page 4: Enu
Page 107 ft-950 o perating m anual g roup n o . M enu f unction a vailable v alues d efault s etting tx audio 091 taud eq1 frq off/100 ~ 700 hz (100 hz/step) off tx audio 092 taud eq1 lvl –20 ~ +10 +5 tx audio 093 taud eq1 bw 1 ~ 10 10 tx audio 094 taud eq2 frq off/700 ~ 1500 hz (100 hz/step) off tx...
Page 5: Agc G
Page 108 ft-950 o perating m anual agc g roup 001 agc fst dly function: sets the delay time for the agc fast mode. Available values: 20 ~ 4000 msec (20 msec/step) default setting: 300 msec 002 agc mid dly function: sets the delay time for the agc mid mode. Available values: 20 ~ 4000 msec (20 msec/s...
Page 6: Display G
Page 109 ft-950 o perating m anual 011 disp rtr stu function: selects the starting point of your rotator controller’s indicator needle. Available values: 0/90/180/270° default setting: 0° a dvice : if the optional antenna rotator is not connected, this ad- justment has no effect. 012 disp rtr adj fu...
Page 7: General G
Page 110 ft-950 o perating m anual 019 key cw mem1 function: permits entry of the cw message for message register 1. Available values: typ1/typ2 default setting: typ2 typ1: you may enter the cw message from the main tun- ing dial knob and [clar/vfo-b] knob. Typ2: you may enter the cw message from th...
Page 8: Mode-Am G
Page 111 ft-950 o perating m anual 032 gene ut dial function: selects the μ-tune mode. Available values: stp1/stp2 default setting: stp1 stp1: activates the μ-tune system using “coarse” steps of the [select(μ-tune)] knob (2 steps/ click) on the 7 mhz and lower amateur bands. On the 10/14 mhz bands, ...
Page 9: Enu
Page 112 ft-950 o perating m anual 041 a1a cw auto function: enables/disables cw keying while operating on ssb. Available values: off/50/on default setting: off off: disables cw keying while operating on ssb. 50: enables cw keying only while operating ssb on 50 mhz (but not hf). On: enables cw keyin...
Page 10: Mode-Fm G
Page 113 ft-950 o perating m anual mode-fm g roup 056 f3e mic function: sets the microphone gain for the fm mode. Available values: ur/0 ~ 100 default setting: 50 when this menu is set to “ur”, you may adjust the micro- phone gain using the front panel’s [mic gain] knob. 057 f3e 28 rpt function: set...
Page 11: Mode-Ssb G
Page 114 ft-950 o perating m anual mode-ssb g roup 064 j3e tx bpf function: selects the audio passband of the dsp modula- tor on the ssb mode. Available values: 1-30/1-29/2-28/3-27/4-26 default setting: 3-27: 300 ~ 2700 (hz) 1-30: 100 ~ 3000 (hz) 1-29: 100 ~ 2900 (hz) 2-28: 200 ~ 2800 (hz) 3-27: 300...
Page 12: Enu
Page 115 ft-950 o perating m anual 073 scp 1.8 fix function: selects the scan start frequency of the fix mode spectrum scope while monitoring on the 160 m amateur band. Available values: 1.800 ~ 1.999 mhz (1 khz steps) default setting: 1.800 mhz 074 scp 3.5 fix function: selects the scan start frequ...
Page 13: Tuning G
Page 116 ft-950 o perating m anual tuning g roup 084 tun dialstp function: setting of the main tuning dial knob’s and the [clar/vfo-b] knob’s tuning speed on the ssb, cw, and am modes. Available values: 1/5/10 hz default setting: 10 hz 085 tun cw fine function: enabling/disabling of the “fine” tunin...
Page 14: Enu
Page 117 ft-950 o perating m anual 097 taud eq3 frq function: selects the center frequency of the high range for the parametric microphone equalizer. Available values: off/1500 ~ 3200 hz (100 hz/step) default setting: off off: the equalizer gain and q-factor are set to factory defaults (flat). 1500 ...
Page 15: Tx General G
Page 118 ft-950 o perating m anual 114 tgen vox sel function: selects the audio input source for triggering tx during vox operation. Available values: nic/data default setting: nic nic (mic): the vox function will be activated by mi- crophone audio input. Data (data): the vox function will be activa...