Yaesu FT-950 Manual - Display G
Page 109
FT-950 O
PERATING
M
ANUAL
011 DISP RTR STU
Function: Selects the starting point of your rotator
controller’s indicator needle.
Available Values: 0/90/180/270°
Default Setting: 0°
A
DVICE
:
If the optional Antenna Rotator is not connected, this ad-
justment has no effect.
012 DISP RTR ADJ
Function: Adjusts the indicator needle precisely to the
starting point set in menu item “011 DISP RTR STU
011 DISP RTR STU
011 DISP RTR STU
011 DISP RTR STU
011 DISP RTR STU
”.
Available Values: –30 ~ 0° (2°/step)
Default Setting: 0
A
DVICE
:
If the optional Antenna Rotator is not connected, this ad-
justment has no effect.
013 DISP QMB MKR
Function: Enables/Disables the QMB Marker (White ar-
row “V”) to display on the Spectrum Band Scope when
the optional DMU-2000 Data Management Unit is con-
nected.
Available Values: On/OFF
Default Setting: On
A
DVICE
:
If the optional DMU-2000 Data Management Unit is not
connected, this adjustment has no effect.
DISPLAY G
ROUP
DVS G
ROUP
014 DVS RX LVL
Function: Sets the audio output level from the optional
DVS-6 Voice Memory Unit.
Available Values: 0 ~ 100
Default: 50
A
DVICE
:
If the optional DVS-6 Voice Memory Unit is not connected,
this adjustment has no effect.
015 DVS TX LVL
Function: Sets the microphone input level to the optional
DVS-6 Voice Memory Unit
Available Values: 0 ~ 100
Default: 50
A
DVICE
:
If the optional DVS-6 Voice Memory Unit is not connected,
this adjustment has no effect.
KEYER G
ROUP
016 KEY BEACON
Function: Sets the interval time between repeats of the
beacon message.
Available Values: OFF/1 ~ 255 sec
Default Setting: OFF
017 KEY NUM STL
Function: Selects the Contest Number “Cut” format for
an imbedded contest number.
Available Values: 1290/AunO/Aunt/A2nO/A2nt/12nO/
12nt
Default Setting: 1290
1290: Does not abbreviate the Contest Number
AunO: Abbreviates to “A” for “One”, “U” for “Two”,
“N” for “Nine”, and “O” for “Zero.”
Aunt: Abbreviates to “A” for “One”, “U” for “Two”,
“N” for “Nine”, and “T” for “Zero”.
A2nO: Abbreviates to “A” for “One”, “N” for “Nine”,
and “O” for “Zero”.
A2nt: Abbreviates to “A” for “One”, “N” for “Nine”,
and “T” for “Zero”.
12nO: Abbreviates to “N” for “Nine” and “O” for “Zero”.
12nt: Abbreviates to “N” for “Nine” and “T” for “Zero”.
018 KEY CONTEST
Function: Enters the initial contest number that will in-
crement/decrement after sending during contest QSOs.
Available Values: 0 ~ 9999
Default Setting: 1
A
DVICE
:
Press the [CLEAR] button to reset the contest number to
“1”.
M
ENU
M