1. DL manuals
  2. Yaesu
  3. Transceiver
  4. FTM-3100R
  5. Advanced Manual

Yaesu FTM-3100R Advanced Manual

Other manuals for FTM-3100R: Quick Manual, Operating Manual

Summary of FTM-3100R

  • Page 1

    Ftm-3100r advance manual vol dial sql d w m w setup rev txpo v / m m h z vhf fm transceiver.

  • Page 2: Contents

    2 contents ftm-3100r advance manual basic operation .............................................................................................................. 3 microphone gain setting ................................................................................................ 3 rf squelch ....

  • Page 3: Ftm-3100R Advance Manual

    3 ftm-3100r advance manual basic operation microphone gain setting the microphone gain has been programmed at the factory to a level that should be satisfactory for the supplied mh-48a6ja microphone. If an after-market microphone is used, you may wish to set a different mic gain level. 1. Press and ...

  • Page 4: Ftm-3100R Advance Manual

    4 ftm-3100r advance manual advanced operation programming the key assignments default ftm-3100r key functions have been assigned to the microphone [ p1 ]/[ p2 ]/[ p3 ]/ [ p4 ] keys at the factory. The user may change these key function assignments, if quick access to another function is desired. To ...

  • Page 5: Advanced Operation

    5 advanced operation ftm-3100r advance manual split tone operation the ftm-3100r can be configured to operate in a “split tone” system via the setup menu, to facilitate operation on repeaters using a mix of both ctcss and dcs control. 1. Press and hold in the [ mhz ( setup )] key for one second to e...

  • Page 6: Advanced Operation

    6 advanced operation ftm-3100r advance manual tone search when the ctcss tone being transmitted by another station is not known, you can tune the radio to the incoming signal and activate tone scan to search for and identify the tone being used. To scan for the tone in use: 1. Set the transceiver up...

  • Page 7: Advanced Operation

    7 advanced operation ftm-3100r advance manual dcs search when the dcs code being transmitted by another station is not known, you can tune the radio to the incoming signal and activate dcs code scan to search for and identify the dcs code being used. To scan for the dcs in use: 1. Set the transceive...

  • Page 8: Advanced Operation

    8 advanced operation ftm-3100r advance manual epcs (enhanced paging & code squelch) operation the ftm-3100r includes an enhanced ctcss tone encoder/decoder and a dedicated microprocessor providing paging and selective calling features. This allows placing a call to a specific station (paging), and c...

  • Page 9: Advanced Operation

    9 advanced operation ftm-3100r advance manual activating the enhanced paging & code squelch system 1. Press and hold in the [ mhz ( setup )] key for one second to enter the set mode. 2. Rotate the dial knob to select “ sql type 34 ”. Vol dial d w m w setup rev sql txpo v / m m h z 3. Press the [ mhz...

  • Page 10: Advanced Operation

    10 advanced operation ftm-3100r advance manual dtmf operation dtmf tones (dual tone multi frequencies) are the tones you hear when dialing from a telephone keypad. The ftm-3100r transceiver can transmit the dtmf codes by using the keys on the microphone or recalling registered number strings from me...

  • Page 11: Advanced Operation

    11 advanced operation ftm-3100r advance manual registering a dtmf code 1. Press and hold in the [ mhz ( setup )] key for one second to enter the set mode. 2. Rotate the dial knob to select “ dt set 12 ”. Vol dial d w m w setup rev sql txpo v / m m h z 3. Press the [ mhz ( setup )] key momentarily, t...

  • Page 12: Advanced Operation

    12 advanced operation ftm-3100r advance manual transmitting the registered dtmf code 1. Press and hold in the [ mhz ( setup )] key for one second to enter the set mode. 2. Rotate the dial knob to select “ dt auto 10 ”. Vol dial d w m w setup rev sql txpo v / m m h z 3. Press the [ mhz ( setup )] key...

  • Page 13: Advanced Operation

    13 advanced operation ftm-3100r advance manual setting dtmf autodialer tx delay time a longer delay may be set between the time the transmitter is keyed and the first dtmf digit is sent: 1. Press and hold in the [ mhz ( setup )] key for one second to enter the set mode. 2. Rotate the dial knob to se...

  • Page 14: Ftm-3100R Advance Manual

    14 ftm-3100r advance manual memory operation split memory a separate transmit frequency may be registered to a memory channel to which a receive frequency has already been registered. 1. In the vfo mode, select the transmit frequency to be registered. 2. Press and hold the [ v/m ( mw )] key for one ...

  • Page 15: Memory Operation

    15 memory operation ftm-3100r advance manual naming a memory channel you may wish to append an alphanumeric “tag” (label) to each memory, to aid in recollection of the channel’s use (such as club name, etc.). 1. Recall the memory channel on which you wish to append a label. 2. Press and hold in the ...

  • Page 16: Ftm-3100R Advance Manual

    16 ftm-3100r advance manual scanning scan resume options select one of the three receiving operations to be performed after the scanning stops. (1) restart scanning after receiving the frequency for the set amount of time. Select from 2.0 to 10.0 seconds (0.5 step). (2) continue receiving the freque...

  • Page 17: Scanning

    17 scanning ftm-3100r advance manual memory skip scanning when some memory channels are continuously active, you may wish to skip them during scanning , but still have them available for manual selection . To mask a memory to be skipped (only) during scanning, use the following procedure: 1. Set the...

  • Page 18: Scanning

    18 scanning ftm-3100r advance manual preferential memory scan the ftm-3100r also allows setting up a “preferential scan list” of channels, which you can “flag” within the memory system. The flagged channels are designated by an “ ” icon when they are selected, one by one, for the preferential scan l...

  • Page 19: Scanning

    19 scanning ftm-3100r advance manual programmable memory scan (pms) the ftm-3100r can be set to tune or scan only the frequencies between user-defined lower and band limits. Example: set up a pms channel by registering a lower frequency of 144.300 mhz, and an upper frequency of 148.000 mhz to the l1...

  • Page 20: Scanning

    20 scanning ftm-3100r advance manual scanning the programmable memory channels 1. Press the [ v/m ( mw )] key to enter memory mode. 2. Turn the dial knob, or use the microphone keypad, to recall the upper or lower fre- quency pms memory channel (l1 or u1). 3. Press the [ # ] key on the mh-48a6ja mic...

  • Page 21: Scanning

    21 scanning ftm-3100r advance manual priority channel scanning (dual watch) the ftm-3100r’s scanning features include a two-channel scanning capability which allows operating on a vfo, memory channel, or home channel, while periodically checking a user- defined memory channel for activity. If a stat...

  • Page 22: Ftm-3100R Advance Manual

    22 ftm-3100r advance manual clone the ftm-3100r includes a convenient “clone” feature, which allows the memory and configuration data from one transceiver to be transferred to another ftm-3100r. This can be particularly useful when configuring a number of transceivers for a public service operation....

  • Page 23: Ftm-3100R Advance Manual

    23 ftm-3100r advance manual setup (menu) mode the ftm-3100r setup (menu) mode, already described in parts of many previous chapters, is easy to activate and setup. The menus may be used to configure many of transceiver parameters, some of which have not been detailed previously. Use the following pr...

  • Page 24: Setup (Menu) Mode

    24 setup (menu) mode ftm-3100r advance manual menu item function available values default 15: lcd dmmr setting of the front panel display illumi- nation level. Level 1/2/3/4 level 4 16: lock selects the control locking lockout combination. K e y + d i a l / p t t / key+ptt/dial+ptt/ all/key/dial key...

  • Page 25: Setup (Menu) Mode

    25 setup (menu) mode ftm-3100r advance manual menu item function available values default 40: ts speed selects the tone search or dcs search scanner speed. Fast/slow fast 41: ver disp displays the transceiver software version cpu x.Xx dsp x.Xx --- 42: wx alert enables/disables the weather alert fea-...

  • Page 26: Setup (Menu) Mode

    26 setup (menu) mode ftm-3100r advance manual menu selection details 1 apo function: enables/disables the automatic power off feature. Available values: 0.5 h to 12.0 h (0.5 h/step) / off default: off 2 bclo function: enables/disables the busy channel lock-out feature. Available values: on / off def...

  • Page 27: Ftm-3100R Advance Manual

    27 ftm-3100r advance manual 8 dcs code function: setting of the dcs code. Available values: 104 standard dcs codes default: 023 dcs code 023 025 026 031 032 036 043 047 051 053 054 065 071 072 073 074 114 115 116 122 125 131 132 134 143 145 152 155 156 162 165 172 174 205 212 223 225 226 243 244 245...

  • Page 28: Menu Selection Details

    28 menu selection details ftm-3100r advance manual 16 lock function: selects the control locking lockout combination. Available values: key+dial / ptt / key+ptt / dial+ptt / all / key / dial default: key+dial 17 mic gain function: adjust the microphone gain level. Available values: level 1 - level 9...

  • Page 29: Menu Selection Details

    29 menu selection details ftm-3100r advance manual 21 pag cd-r function: setting the receiver pager code for the enhanced ctcss paging & code squelch function see page 8 for details. 22 pag cd-t function: setting the transmitting pager code for the enhanced ctcss paging & code squelch function. See ...

  • Page 30: Menu Selection Details

    30 menu selection details ftm-3100r advance manual 28 rpt ars function: activates/deactivates the automatic repeater shift feature.. Available values: on / off default: on 29 rpt freq function: sets the magnitude of the repeater shift. Available values: 0.00 - 150.00 mhz default: 0.60 mhz 30 rpt sft...

  • Page 31: Menu Selection Details

    31 menu selection details ftm-3100r advance manual 34 sql type function: selects the tone encoder and/or decoder mode. Available values: tone / tsql / dcs / rv tone / pager / off default: off tone: ctcss encoder tsql: ctcss encoder/decoder dcs: digital coded encoder/decoder rv tone: reverse ctcss de...

  • Page 32: Menu Selection Details

    32 menu selection details ftm-3100r advance manual 40 ts speed function: selects the tone search or dcs search scanner speed. Available values: fast / slow default: fast 41 ver disp function: displays the transceiver software version. Available values: cpu 42 wx alert function: enables/disables the ...

  • Page 33

    Yaesu musen co., ltd. All rights reserved. No portion of this manual may be reproduced without the permission of yaesu musen co., ltd. Copyright 2016 1605-b0 yaesu musen co., ltd. Tennozu parkside building 2-5-8 higashi-shinagawa, shinagawa-ku, tokyo 140-0002 japan yaesu usa 6125 phyllis drive, cypr...