Yaesu FTM-3100R Quick Manual
Quick Manual
1 VOL knob
2 LCD display
3 DIAL knob
4 Power/LOCK key
5 V/M MW key (
)
6 MHz SETUP key (
)
7 TXPO key (
TXPO
)
8 REV DW key (
)
9 SQL key (
SQL
)
10 External MIC jack
Adjusting the volume
Rotate the volume clockwise/counterclockwise to adjust
the volume level.
Tuning in to the frequency
Press
to switch to VFO mode, then rotate the DIAL.
Press
to make the first three digits of the frequency
display blink, then rotate the DIAL to set the frequency
by one MHz increments.
Changing the transmit power level
Press
TXPO
, then rotate DIAL to select the transmit pow-
er level.
“HIGH”
à
“LOW”
à
“MID”
Press
TXPO
to set the transmit power level.
Restoring defaults (All Reset)
All transceiver settings and memory content may be
restored to the default settings.
Turn the power OFF.
While pressing
TXPO
,
, and
, turn the power
ON.
When “ALL RESET PUSH V/M KEY” appears, release
the keys.
Press
to reset.
Locking the keys and DIAL
Press Power/LOCK to lock the keys and knobs.
Press Power/LOCK again to unlock.
Returning to the operating screen
Press and hold
for over one second to return to the
operating screen from the Setup menu.
Supplements
• Press
to return to the previous
screen.
• Press and hold
for over one sec-
ond to return to the operating screen.
FTM-3100R
EH052N560
VOL
DIAL
D W
M W
SETUP
REV
V / M
M H z
SQL
TXPO
10
9
8
3
5
4
7
6
2
1