1. DL manuals
  2. Yaesu
  3. Transceiver
  4. FTM-3200DR
  5. Operating Manual

Yaesu FTM-3200DR Operating Manual - Ftm-3200Dr Operating Manual

Summary of FTM-3200DR

  • Page 1

    C4fm/fm vhf digital/analog transceiver ftm-3200dr operating manual vol dial sql txpo d w m w setup rev d/a v / m m h z.

  • Page 2: Contents

    2 contents ftm-3200dr operating manual ftm-3200dr quick reference guide ..................... 3 introduction ............................................................... 4 features of this radio ............................................... 4 accessories & options .................................

  • Page 3: Ftm-3200Dr Operating Manual

    3 ftm-3200dr operating manual ftm-3200dr quick reference guide vol dial sql txpo d w m w setup rev d/a v / m m h z lock p3 p2 p1 7 1 4 8 2 0 5 9 b a c d 3 6 p4 lamp dtmf microphone mh-48 abc jkl tuv ghi pqrs def mno wxyz mic power switch press and hold for one second. Frequency dial knob selects the...

  • Page 4: Ftm-3200Dr Operating Manual

    4 ftm-3200dr operating manual introduction features of this radio 144 mhz mobile radio, equipped with a c4fm digital communication modem 65 watts of power output, with selection of three power levels for every operating situ- ation clear audio and data communication is achieved using the digital mod...

  • Page 5: Ftm-3200Dr Operating Manual

    5 ftm-3200dr operating manual accessories & options supplied accessories dtmf microphone mh-48a6ja mobile mounting bracket (attachment screw set) dc power cable w/fuse operating manual safty guide warranty card spare fuse (25 a) usb cable optional accessories mh-42c6j microphone mh-48a6ja dtmf micro...

  • Page 6: Ftm-3200Dr Operating Manual

    6 ftm-3200dr operating manual installation connecting the microphone connect the supplied mh-48a6ja microphone to the ftm-3200dr. Plug the microphone connector into the mic jack on the front panel until it clicks. Note: when disconnecting the microphone, pull the cable while pressing the connector l...

  • Page 7: Installation

    7 installation ftm-3200dr operating manual mobile installation the ftm-3200dr must only be installed in vehicles having a 13.8 volt negative ground electrical system. Mount the transceiver where the display, controls, and microphone are easily accessible, using the supplied mounting bracket. The tra...

  • Page 8: Installation

    8 installation ftm-3200dr operating manual power connection to minimize voltage drop and avoid blowing the vehicle’s fuses, connect the supplied dc power cable directly to the battery terminals. Do not attempt to defeat or bypass the dc cable fuse - it is there to protect you, your transceiver, and ...

  • Page 9: Installation

    9 installation ftm-3200dr operating manual base station installation the ftm-3200dr is ideal for base station use as well as in mobile installations. The ftm-3200dr is specifically designed to integrate into your station easily, using the fol- lowing information as a reference. Ac power supplies ope...

  • Page 10: Ftm-3200Dr Operating Manual

    10 ftm-3200dr operating manual front panel controls & switches front panel vol dial sql txpo d w m w setup rev d/a v / m m h z vol knob turning the knob clockwise increases the volume, whereas turning it counterclock- wise decreases the volume. Mode/status indicator indicates the transmission/recept...

  • Page 11: Ftm-3200Dr Operating Manual

    11 front panel controls & switches ftm-3200dr operating manual [sql(txpo)] key press and hold the key in for over one second to select the transmit power (high: 65 w / mid: 30 w / low: 5 w). [rev(dw)] key during split-frequency operation, such as through a repeater, this key reverses the transmit an...

  • Page 12: Ftm-3200Dr Operating Manual

    12 ftm-3200dr operating manual microphone switches microphone (mh-48a6ja) ptt switch press this switch to transmit, and release it to receive. Key pad these 16 keys generate dtmf tones during transmission. In the receive mode, these 16 keys can be used for direct frequency entry and/or direct numeri...

  • Page 13: Ftm-3200Dr Operating Manual

    13 ftm-3200dr operating manual rear panel connectors rear panel ant coaxial socket connect a 144 mhz antenna to this type-m (so-239) socket using 50-ohm coaxial cable and a type-m (pl-259) plug. Make sure the antenna is designed specifically for use on the operating frequency. Ext sp jack this 2-con...

  • Page 14: Ftm-3200Dr Operating Manual

    14 ftm-3200dr operating manual basic operation turning the transceiver on and off 1. To turn the transceiver on, press and hold the pwr/lock key for one second. 2. To turn the transceiver off, again press and hold the pwr/lock key for one second. Vol dial sql txpo d w m w setup rev d/a v / m m h z y...

  • Page 15: Basic Operation

    15 basic operation ftm-3200dr operating manual frequency navigation using the dial rotating the dial knob allows tuning in the pre-programmed steps. Clockwise rotation tunes the frequency upwards, whereas coun- terclockwise rotation tunes the frequency downwards. R press the [ mhz(setup)] key moment...

  • Page 16: Basic Operation

    16 basic operation ftm-3200dr operating manual selecting the communication mode the ftm-3200dr transceiver is equipped with the ams (automatic mode select) func- tion which automatically selects from two modes of transmission corresponding to the signal being received. The transmit mode is selected ...

  • Page 17: Basic Operation

    17 basic operation ftm-3200dr operating manual setting the transmission mode when using the ams function txmanual (“ ” blinks: 1 sec on, 0.5 sec off) automatically selects one of the two communication modes according to the received signal. Briefly pressing [ ptt] on the microphone switches between ...

  • Page 18: Basic Operation

    18 basic operation ftm-3200dr operating manual transmission 1. Press and hold ptt on the microphone. In analog mode, both the upper and lower portions of the ptt mode/status indicator light red. In digital mode, the upper portion of the mode/status indicator lights red and the low- er portion of the...

  • Page 19: Basic Operation

    19 basic operation ftm-3200dr operating manual adjusting the transmit power when communicating with a nearby station, the transmit power level may be lowered to reduce the battery power consumption. 1. Press and hold the [ sql(txpo)] key for over one second. 2. Rotate the dial to select the transmit...

  • Page 20: Ftm-3200Dr Operating Manual

    20 ftm-3200dr operating manual advanced operation repeater operation the ftm-3200dr includes the ars (automatic repeater shift) function, which permits communication through repeaters automatically, by simply setting the receiver to the re- peater frequency. 1. Tune to the repeater frequency. 2. Pre...

  • Page 21: Advanced Operation

    21 advanced operation ftm-3200dr operating manual weather broadcast reception the ftm-3200dr includes a unique feature which allows reception of weather broad- casts in the 160 mhz frequency range. Ten standard weather broadcast channels are preloaded into a special memory bank. To listen to a weath...

  • Page 22: Advanced Operation

    22 advanced operation ftm-3200dr operating manual ctcss operation this radio is equipped with the ctcss (continuous tone-coded squelch system) that allows audio to be heard only when receiving signals containing a tone corresponding to the tone squelch menu setting. By matching the ctcss tone with t...

  • Page 23: Advanced Operation

    23 advanced operation ftm-3200dr operating manual 3. Rotate the dial knob to select “dcs”, then press and hold the [ mhz(setup)] key for over one second. Displays “ ” on the screen. The squelch opens only when receiving a signal con- taining the corresponding dcs code. Note: from the setup menu, you...

  • Page 24: Ftm-3200Dr Operating Manual

    24 ftm-3200dr operating manual memory operation the ftm-3200dr provides a wide variety of memory system resources. These include: r 199 “basic” memory channels, numbered “1” through “199”. R a “home” channel, providing storage and quick recall of one prime frequency. R 10 sets of band-edge memories,...

  • Page 25: Memory Operation

    25 memory operation ftm-3200dr operating manual memory recall once the desired frequencies are stored into memory channels, switch from the “vfo” mode to the “memory recall” mode, to operate on the just-stored memory channels. 1. Press the [ v/m(mw)] key, repeatedly if nec- essary, until the “ ” ico...

  • Page 26: Memory Operation

    26 memory operation ftm-3200dr operating manual masking memories there may be situations where you want to “mask” memories so they are not visible during memory selection or scanning. (except for memory channel “1”, the priority chan- nel, and the home channel). 1. In the memory recall mode, press a...

  • Page 27: Ftm-3200Dr Operating Manual

    27 ftm-3200dr operating manual scanning basic scanner operation before activating the scanner, make sure that the squelch is set to silence the back- ground noise when no signal is present. Scanning is not possible while the squelch is open (if noise or signals are being heard). Scanning may be star...

  • Page 28: Ftm-3200Dr Operating Manual

    28 ftm-3200dr operating manual gm function what is the gm (group monitor) function? The gm function automatically monitors the channel for any other stations with the gm function in operation on the same frequency, or stations transmitting in dn mode that are within communication range. You can be n...

  • Page 29: Ftm-3200Dr Operating Manual

    29 ftm-3200dr operating manual reset procedure/clone reset procedure in some instances of erratic or unpredictable operation, the cause may be corruption of data in the microprocessor (due to static electricity, etc.). If this happens, resetting the microprocessor may restore normal operation. Note ...

  • Page 30: Ftm-3200Dr Operating Manual

    30 ftm-3200dr operating manual miscellaneous settings programming the key assignments default ftm-3200dr key functions have been assigned to the microphone’s [ p1]/[p2]/ [p3]/[p4] keys at the factory. The user may change these key function assignments, if quick access to another function is desired....

  • Page 31: Miscellaneous Settings

    31 miscellaneous settings ftm-3200dr operating manual displaying the supply voltage display the power supply voltage. Note: see setup menu item “8 dc volt” on page 32. Displaying the temperature indicates the current temperature inside the transceiver’s case. Note: see setup menu item “44 temp” on p...

  • Page 32: Ftm-3200Dr Operating Manual

    32 ftm-3200dr operating manual setup (menu) mode the ftm-3200dr setup (menu) mode, already described in parts of many previous chapters, is easy to activate and setup. The menus may be used to configure many of transceiver parameters, some of which have not been detailed previously. Use the followin...

  • Page 33: Setup (Menu) Mode

    33 setup (menu) mode ftm-3200dr operating manual menu item function available values default 16: dt delay setting of the dtmf autodialer tx delay time. 50/250/450/750/1000 450 ms 17: dt set loading of the dtmf autodialer memo- ries. --- --- 18: dt speed setting of the dtmf autodialer sending speed. ...

  • Page 34: Setup (Menu) Mode

    34 setup (menu) mode ftm-3200dr operating manual menu item function available values default 40: scan skp selects the memory scan mode. Off/skip/select off 41: sql exp sets the squelch type separately for transmission and reception. On/off off 42: sql type selects the tone encoder and/or decod- er m...

  • Page 35: Ftm-3200Dr Operating Manual

    35 ftm-3200dr operating manual maintenance care and maintenance turn the power off before wiping away any dust and stains on the transceiver with a dry soft cloth. For stubborn stains, slightly moisten a soft cloth and wring it out before using it to wipe away the stains. Caution: never use washing ...

  • Page 36: Ftm-3200Dr Operating Manual

    36 ftm-3200dr operating manual specifications general frequency range: tx 144 - 148 mhz rx 136 - 174 mhz channel step: 5/6.25/10/12.5/15/20/25/50/100 khz standard repeater shift: ±600 khz frequency stability: ±2.5 ppm [-4 °f to +140 °f (-20 °c to +60 °c)] modes of emission: f3e/f7w antenna impedance...

  • Page 37: Ftm-3200Dr Operating Manual

    37 ftm-3200dr operating manual note.

  • Page 38: Ftm-3200Dr Operating Manual

    38 ftm-3200dr operating manual 1. Changes or modifications to this device that are not expressly approved by yaesu musen could void the user’s authorization to operate this device. 2. This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this d...

  • Page 40

    Copyright 2016 yaesu musen co., ltd. All rights reserved. No portion of this manual may be reproduced without the permission of yaesu musen co., ltd. Printed in japan 1602b-bo *eh052n100* e h 0 5 2 n 1 0 0 yaesu musen co., ltd. Tennozu parkside building 2-5-8 higashi-shinagawa, shinagawa-ku, tokyo 1...