Yaesu VR-120D Technical Supplement - Alignment
11
Alignment
r Press the [BND(p)] key while press and holding
[FUNC] key. "
S M ET +
" will appear on the
display.
r Press the [V/M] key while press and holding
[FUNC] key. Sounds a beep.
r Reduce the SSG output level to -5 dBµ.
r Press the [SCAN] key while press and holding
[FUNC] key. "
S M ET 2
" will appear on the
display.
r Press the [V/M] key while press and holding
[FUNC] key. Sounds a beep.
WFM mode:
r Set the receiver to 100.050 MHz, WFM mode.
r Press the [BND(p)]. "
S M ET
" will appear on the
display.
r Tune the SSG to 100.050 MHz with ±75 kHz
deviation @1 kHz tone modulation, and set the
output level to 35 dBµ.
r Press the [BND(p)] key while press and holding
[FUNC] key. "
S M ET +
" will appear on the
display.
r Press the [V/M] key while press and holding
[FUNC] key. Sounds a beep.
r Reduce the SSG output level to 5 dBµ.
r Press the [SCAN] key while press and holding
[FUNC] key. "
S M ET 2
" will appear on the
display.
r Press the [V/M] key while press and holding
[FUNC] key. Sounds a beep.
AM mode:
r Set the receiver to 1.050 MHz, AM mode.
r Press the [BND(p)]. "
S M ET
" will appear on the
display.
r Tune the SSG to 1.050 MHz with 30%
modulation @1 kHz tone, and set the output level
to 20 dBµ.
r Press the [BND(p)] key while press and holding
[FUNC] key. "
S M ET +
" will appear on the
display.
r Press the [V/M] key while press and holding
[FUNC] key. Sounds a beep.
r Reduce the SSG output level to 0 dBµ.
r Press the [SCAN] key while press and holding
[FUNC] key. "
S M ET 2
" will appear on the
display.
r Press the [V/M] key while press and holding
[FUNC] key. Sounds a beep.
Press the [V/M] key to save the new setting and
exit to the normal operation.