Yale ENA-DC SmartHome Alarm series User Manual

Page of 4

Download

Bookmark us

Wirefree Yale ENA-DC

Magnetic Door/Window

contact

Features:

1. Learn / Test Button

-Press the Test button once to enter Test

Mode for 3 minutes.

-Press & hold the Test button for 8 seconds

to enable Tilt Switch function.

2. LED Indicator

3. Tilt Switch

4. Supervision Enable / Disable Jumper

5. Battery

6. Battery Insulator

7. Top & Bottom Cover securing screw hole

8. Knockouts

9. Rib Mark (for aligning magnet)

Pack contents:

1 x Door contact

1 x Magnet

2 x Magnet spacer

4 x Screws

4 x Wall plug

2 x Adhesive stickers

1 x ½ AA lithium battery

Supervision Enable/Disable Jumper

After installation, the DC will automatically transmit

Supervisory signals periodically to the Control Panel

at random intervals of less than 20 minutes. If the

Control Panel has not received the signal from the

DC for the preset period of time, the Control Panel

will indicate on its display that the particular DC is

experiencing an out-of-signal problem.

Jumper On= Supervision Disabled

Jumper Off= Supervision Enabled (Default)

SmartHome Alarm series

Page 1
Wirefree yale ena-dc magnetic door/window contact features: 1. Learn / test button -press the test button once to enter test mode for 3 minutes. -press & hold the test button for 8 seconds to enable tilt switch function. 2. Led indicator 3. Tilt switch 4. Supervision enable / disable jumper 5. Batte...
Page 2
Programming step 1: pull out the door contact battery tab. Step 2: login to the engineer menu on the control panel. Select “zone settings” → “zone config.” → “add zone” on the menu. Press ok and the lcd of the control panel will display “*push button on* device to add”. Step 3: press door contact’s ...
Page 3
Operation led indicator off normal operation led flash (2 sec) - detects motion during low battery, tamper activated or test mode. - tilt tamper switch is activated. Tilt switches when the door contact is tilted, a tamper alarm will be triggered. The tilt switch is disabled by factory default. Openi...
Page 4
2 year instruction statement: this product is guaranteed for consumers against faulty workmanship, materials and function for a period of 2 years from the date of purchase providing the full installation and maintenance instructions are followed. Please keep your proof of purchase safe, this must be...