Yale RH00529S Use, Care And Installation Manual - Maintenance –

Maintenance –

Cleaning and Installing Filters

12

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, 

or steel wool/ scoring pads which will scratch and damage surface.  Do not use products containing chlorine 

bleach or orange cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless 

luster and grain. Always scrub lightly using a micro ber or clean cotton cloth and with the grain.

Decorative Mesh Filters

The lters are intended to trap residue and grease from cooking. Although the  lters should never need 

replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.

Filters may be placed in dishwasher at low heat or soaked in hot soapy water  Dry  lters and re-install before 

using hood.

Installing Decorative Mesh Filters, FIG 4:

1.   Place back of  lter into channel on back of power pack.

2.  Pull down on  lter handle and pivot up until  lter is  ush 

      with bottom of power pack and locks into place.

Replacing Decorative Mesh Filters:

Hood Model: 

Part No.  

Qty. to Order 

RH00529S 50200037  2

RH00538S    

50200037 

3

2

1

FIG 4