Yale YAAYRDDDV70016x User Manual - Auto-Power Off Setting:
press menu button to enter.
Select “ setting the date” key, press the menu button to enter and use
“
”key to select the digit to be set and use“
”to adjust the
number.
If you want to add date and time information on the photos, you can
choose the “time & date display” -ON, otherwise choose OFF.
this product has user-defined setting for auto-power off.
if you need to change the default setting, please press “menu”
button, then choose the “auto-power off ” and press “menu” button
to enter.
There are 4 options to choose in this menu: 10S/20S/30S/OFF.
20S is the default mode, which is the best option for balancing the
power consumption and operational convenience.
OFF mode is for laboratory test and for customers with special
needs. Caution: in this mode the screen will stay on until manually
turned off, if not turned off, the batteries will quickly run out of
power.
-
-
*
-
-
-
-
Auto-power off setting:
*
-
-
-
*
-
-
-
*
-
-
-
Visitors
When visitors press the door bell button on the door viewer camera,
the door bell will ring inside of the room.
“
”
“
”
At the same time, the screen inside the door will turn on
automatically to show the outside images and will last for 20
seconds before turning itself off.
Also as the door bell is pressed, the camera will
automatically take a photo of the visitors and the photo will be
stored in the TF card in case the host is out, so as to check the
visitors' identity or to use the information for security purposes.
Press the power button, an image of the exterior will be shown on the
screen.
The screen will automatically power off after 20 seconds with no
other operations.
After turning on the product, press on the power button again and
the product will be turned off.
When viewing outside with this product, photos or videos
can be taken at the same time.
When the screen is on, press
to take a photo.
To take a video, press the
till the instruction icon appears to
To view outside
To check outside and take photos or videos
8