Yale YDM 3168 User Manual - How to Use
Break-in Alarm
Break-in Alarm :
When the front handle is seperated from
the door the damage alarm will sound.
Method ❶
Enter the registered PIN Code.
Method ❷
Press the interior
Ⓡ button for 5 seconds.
Method ❸
Touch the registered Card Key.
If a wrong PIN Code or Card Key entered for 5 consecutive times,
3-minute Lock out mode is activated and nothing will work for
3 minutes.
Method ❶
Press Ⓡ button.
Method ❷
Depress inside lever handle.
During the 3-minute Lock Out mode, buttons on the outer handle will not work.
3-minute Lock Out Feature
Operate the lock with the mechanical key
when there is a problem with the lock.
Such as :
- Forgotten User PIN Code
- Electronic malfunction
Pull down the
emergency
cover
Location of
key hole
Emergency mechanical key override
Lost card key
Product malfunction
If you lose your card, rest of card keys must
be re-registered to invalidate missing one.
Lost card key
Re-registering card key
Reset Button
Press reset button located in the center of
[Emergency power terminal] with a finger and
try again testing the Card Key or the PIN Code.
If it still does not work, call the after-sales service.
Enter the PIN Code in case you lose the card key or you are not carrying it.
※ It is a user’s liability to break the lock because the user did not register any PIN Code.
Note
Normal mode
Advanced mode
How to Use
Normal mode
Advanced mode
How to Use
To turn off Alarm
To Release 3-minute Lock Out
24
25
ENGLISH
※
It’s only valid in Normal mode