Yamagata YDH4013 User Manual - page 3
PARTS DESCRIPTION
FRONT
1. Control panel
2. Air outlet
3. Handle
REAR
4. Air inlet
5. Hose hole
6. Water tank
2
CONTROL PANEL
Defrost Water Tank Timer
Operation Power
Indicator Full Indicator Indicator
Indicator Indicator
Humidity Setting Button Timer Button
Function Button Power Button
OPERATION INSTRUCTION
Remarks
*Be sure of correct voltage (220‐240V, 50Hz) is used and plug is well plugged.
1. POWER
Press “POWER” button to turn the unit “ON” or “OFF”.
2. FAN SPEED
Press “SPEED” button to select the fan speed “Hi” or “Low”.
3. TIMER
a. Press “TIMER” button to set the desired timer (1~24 hour).
b. When the set time has come to an end, the unit will be turned off
automatically.
c. Press the “POWER” button before the set time has been reached, the set
time will be cancelled and the unit will be turned off.
4. HUMIDITY SETTING
Press “HUMIDITY SETTING” to set the desired humidity. (RH: 50%, 60%, 70%,
80%, AU [auto], CO [continuous])
Note: When the room humidity is less than the setting humidity 3% then the
compressor of unit will be turned off automatically, until the room humidity is
higher than the setting humidity 3%, compressor will be operated again.
3