Yamagata YDH4013 User Manual - page 5
DRAINAGE INSTRUCTION
The water tank full indicator will be turned on when water full, the unit will be
stopped, please empty the water.
Note: Disconnect the unit from power source before empty the water tank.
1. Remove water tank from the unit carefully.
2. Empty the water tank
3. Insert the water tank gently into the unit till
reach its original position.
4. Press “POWER” button to restart the unit.
CONTINUOUS DRAINAGE
1. Remove water tank from the unit carefully.
2. Connect water hose to hose hole (Fig 02).
*please buy a PVC hose with 12mm diameter
for continuous drainage.
3. Replace the water tank into the unit, then you can
operate the function.
6
Fig 02
Fig 01
Fig 02
MAINTENANCE INSTRUCTION
*Disconnect the unit from the power source before any regularly cleaning,
inspection or maintenance.
Cleaning the air filter
To ensure the appliance’s operation well and avoid any malfunctions, please clean
the air filter every 2 weeks.
1. Press the filter adapter buckle down to
remove the filter.
2. Clean the air filter with vacuum cleaner or
warm water (below 40 °C) every 2 week, and
let it become to naturally then replace.
3. Insert the air filter gently into the unit till Fig.3
reach its original position.
*Remarks:
Please do not use water over 40
o
C to clean the filter or expose it under the
sunlight to avoid deforming the filter.
In order to avoid the dust flow into the unit which will cause failure, please install
the filter to the original position.
Cleaning the body
1. Use soft cloth to wipe the unit clean.
2. Do not ever use volatile chemicals, gasoline, detergents, chemically treated
clothes, or other cleansing solutions. All these could possibly hurt the cabinet.
7
Fig 03