Yamaha 03D Technical Note - page 3
Editware Technical Note
Page 3 of 7
09/24/2002
Fastrack VS and the Yamaha 03D Audio Mixer
3. At the “MIDI / HOST” tab, use the cursor buttons (under the PARAMETER wheel) to select, and
then press the [ENTER] button, to accept the following: (Note: One error in the image above - the
Baud Rate needs to be set to 38.4)
Rear view of the 03D panel
Optional AES YGADI inputs/outputs (not shown) would be at lower right of above image.
Monitoring to amplifier and speakers is from the MONITOR OUT (1/4" TRS) connections
Program Out is from the ST OUT (XLR) connections
Analog inputs 1-8 use balanced XLR connections
Analog inputs 9-16 use 1/4" TRS (tip/ring/sleeve) connections.
Monitor outs uses 1/4" TRS connections.
Bus outs use 1/4" TRS connections.
ST Out uses XLR and is the PROGRAM OUT to any/all record channels.