Yamaha A-S801 Owner's Manual - page 7
CONTROLS AND FUNCTIONS
3
En
English
8 BALANCE control
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances.
If you rotate the BALANCE control to the end of L (left) or
R (right), the opposite side of channel is muted.
9 LOUDNESS control
Retain a full tonal range at any volume level
(see page 12).
0 INPUT selector and indicators
Selects the input source you want to listen to. The
input source indicators light up when the
corresponding input sources are selected.
y
The input source names correspond to the names of the
connection jacks on the rear panel.
A VOLUME control
Increases or decreases the sound output level.
B USB DAC Indicators
Lights up when PCM (Pulse Code Modulation) or
DSD (Direct Stream Digital) digital audio signals are
input to a USB terminal of this unit (see page 14).
C CD DIRECT AMP button and indicator
Reproduces CD sound in the highest signal quality
(see page 12).
The indicator above it lights up when this function is
turned on.
D PURE DIRECT button and indicator
Reproduces any input source in the purest sound
possible (see page 12).
The indicator above it lights up when this function is
turned on.
Note