Yamaha AVENTAGE BD-A1060 Owner's Manual - page 35

30

 En

Advanced playback operation

■

Using Picture in Picture function

(secondary audio/video playback)

BD-Video that includes secondary audio and video 

compatible with Picture in Picture can be played back 

with secondary audio and video simultaneously as a small 

video in the corner.

While PIP Mark (

) or Secondary 

Audio Mark (

) is displayed, press 

PIP to turn the Picture in Picture 

function on/off.

– To listen to secondary audio, make sure that the 

Audio Output setting (Coaxial / Optical or HDMI) is 

set to PCM or Reencode (p. 39).

– Depending on the disc, to listen to secondary audio, 

you may need to set secondary audio to on from the 

top menu of the disc (p. 8). 

– The secondary audio and video for Picture in Picture 

may automatically play back and be removed 

depending on the content. Also, playable areas may 

be restricted.

■

Using the feature of BD-Live™

1.

Set the Network setting (p. 36).

2.

Connect the USB memory device 

to this Player (p. 17).

BD-Live data is saved in a USB memory device 

connected to this Player. To enjoy these functions, 

connect a USB memory device supporting USB 2.0 

High Speed (480 Mbit/s) to one of the USB 

connectors (front/rear) of this Player to use the USB 

memory device as Local Storage.

– Local Storage is used as an auxiliary memory when 

Blu-ray Disc is played back.

– Use a USB memory device with at least 2GB of free 

space.

– BUDA folder is created automatically in the USB 

memory device when necessary.

– If there is insufficient storage space, the data will not 

be copied/downloaded. Delete unneeded data or use 

a new USB memory device.

– Some time may be required for the data to load 

(read/write).

– Yamaha cannot guarantee that all brands’ USB 

memory devices will operate with this Player.

– Do not use a USB extension cable when connecting 

a USB memory device to the USB connector of the 

Player. Using a USB extension cable may prevent 

the Player from performing correctly.

3.

Play back the disc.

4.

Run BD-Live according to the 

instructions on the disc.

– Do not remove the USB memory device or disconnect 

unplug the power cable during BD-Live operations.

– Regarding playback method of BD-Live contents, 

etc., perform the operations in accordance with the 

instructions in the Blu-ray Disc manual.

– To enjoy BD-Live functions, perform the network 

connection (p. 15) and Network settings (p. 36).

– Refer to “BD-Live Connection” (p. 36) regarding the 

setup to restrict access to BD-Live contents.

– The time required to download the provided programs 

into the USB memory device connected to this Player 

varies depending on the internet connection speeds 

and the data volume of the programs.

– BD-Live programs provided through the internet 

may not be able to display the connection depending 

on the status (upgrading) of the provider. In such 

cases, take out the disc and try again.

– If the BD-Live screen does not appear for a while 

after you select the BD-Live function in the Blu-ray 

Disc menu, the USB memory device may not have 

enough free space. In such cases, eject the disc from 

the Player, and then erase the data in the USB 

memory device using the “Format” menu in the 

“Local Storage” (p. 34).

Notes

Primary video

Secondary video

Notes

Notes