Yamaha ClickStation CLST-100 Owner's Manual - Chain Function

17

- 1 1

01

120

Chain Function

Changing Song Order

The Chain Function lets you place saved songs

in any order you like.

1. Press the CHAIN button to enter the CHAIN

mode.

2. Press the STORE button so that both CHAIN

and STORE are shown on the left side of the

display.

3. Press the CHAIN NO. (BEAT) button to se-

lect the chain program number (0 - 9) to

which you want to save the chain.

4. Rotate the TEMPO dial to select the song

that will become the first step in the chain.

5. Press the START/STOP button and STORE

will flash two times in the display to indicate

that the first step in the chain is saved.

6. Press the SONG/STEP+ button to move to

the next step and  enter the setting.

7. Repeat numbers 4 through 6 above to create

a chain program.

* A maximum of 20 steps (songs) can be saved in a

chain program.

Play the Chain Program

1. Press the CHAIN button to enter the CHAIN

mode.

2. Press the CHAIN NO. button to select the

chain program number that you want to use.

3. Press the START/STOP button to start the

song that is set at the top of the list.

4. Press the START/STOP button to stop the

song and then press the SONG/STEP + but-

ton to start the next song in the list.

* Press the SONG/STEP – button to return to the pre-

vious song in the list.

Saved songs (song numbers 0-85)

86 songs maximum

Place the songs in any order you like

20 songs (steps) maximum

The grouping of songs saved here

is a Chain Program

A maximum of 10 Chain Programs

like those shown above can be

created and saved.