Yamaha CRW2100SX Series Owner's Manual - page 18

Setup Flowchart

These flowcharts show the procedure for setting up the CRW2100SX drive.  For

easy cross-referencing, the relevant pages in this manual are also given.

Windows Users

9

STEP

2

Check that the SCSI card is 

recognized correctly (P.22)

STEP

4

Check that the CRW2100SX 

drive is recognized correctly 

(P.22)

STEP

1

Do you have a SCSI card?

STEP

1-1

STEP

1-2

STEP

3

STEP

5

STEP

6

YES

NO

Set up the CRW2100SX drive

Install the CD writing software

Purchase a SCSI card

Install the SCSI card

Recommended models:

Adaptec AHA-2940-series (PCI)

Read this manual and insert the 

SCSI card into the appropriate 

PCI slot on the computer. 

For details about how to install the 

software, refer to the documentation that 

came with it.

Start using the CRW2100SX 

drive!

Use the drive to create audio CDs, to 

back up data on your hard disk, or for 

whatever purpose suits your needs.

1. Set the switches at the rear of the drive. 

(P.12, 13)

2. Connect the SCSI and power cables, 

then switch the drive on. (P.18-20)