Yamaha CRW2100SX Series Owner's Manual - page 24
Manual is about: External SCSI CD-R/RW Drive
of
48
Setup Procedures
15
Installing a SCSI Card
1
Power down your computer and unplug it from the AC outlet.
If you proceed without doing this, you run the risk of receiving an electric
shock and/or short-circuiting and damaging components including the
CRW2100SX drive.
2
Remove the outer casing of the computer. If you need to remove screws in
the process, make sure you don’t lose them.
n
The method for removing the casing can vary depending on the manufacturer.
For details, refer to the documentation that came with your computer.