Yamaha CRW2200IX Series Owner's Manual - Setup Procedures
11
Setup Procedures
This flowchart shows the procedure for setting up the CRW2200IX drive.
For easy cross-referencing, the relevant pages in this manual are given.
Windows Users
Do you have an appropriate IEEE1394
interface card?
The card should be compatible with your
computer.
Does your computer have a
built-in IEEE1394 port?
STEP
1
Install the CD writing software.
Before installing the software, disconnect
all IEEE1394 devices.
STEP
2
Make sure that system configuration
(CPU, RAM, OS, etc.) of your computer
meets the requirements of the
CRW2200IX
drive (
→
→
→
→
Set up the
CRW2200IX
drive
(
→
→
→
→
1 Turn your computer and the drive both
on before connecting.
2 Connect your computer and the drive
using the IEEE1394 interface cable that
came with the drive.
You may need a different cable
depending on the IEEE1394 port
connector on your computer (
Make sure that the
CRW2200IX
drive is correctly
recognized (
Start using the
CRW2200IX
drive
Use the drive to create an audio CD, to backup data
on your hard drive, or for whatever purpose suits
your needs.
Install the card to your
computer.
Read the documentation that
came with the card and properly
set up your computer.
Purchase an IEEE1394 card.
See page 3 for more information about
approved IEEE1394 interface cards that have
been tested for compatibility with the
CRW2200IX
drive.
STEP
3
STEP
4
No
YES
No
YES