Yamaha CRW2200SX Series Owner's Manual - Before Use
4
Before Use
In order to use the CRW2200SX drive, your computer system will need to meet the
following requirements.
Note
The CRW2200SX drive may not write at the maximum speed depending on your computer’s
system configuration.
Windows Users
Computer
• PC/AT-Compatible Computer
• CPU: Pentium II-class or higher, 300 MHz or faster.
• RAM: 32 MB memory (64 MB or more recommended).
Note
If you are using Windows 2000 Professional operating system, you need 64 MB of memory
or more.
• A spare PCI expansion slot for a SCSI card (if one hasn’t been installed yet).
• A PCI bus SCSI card (Ultra SCSI compatible with an external SCSI connector,
such as Adaptec’s AHA-2940 series is recommended).
About SCSI cards
SCSI is a hardware interface that allows for the connection of peripheral devices to the
computer.
To use a computer without a SCSI connection, insert a SCSI card into the appropriate PCI
slot on your computer. For information on how to install the SCSI card, refer to the
documentation that came with it.
Operating System (OS)
Windows 95 (OSR2 or later), Windows 98, Windows 98 Second Edition,
Windows Me, Windows NT4.0 with Service Pack 3 or later, Windows 2000
Professional