Yamaha CRW2200UX Series Owner's Manual - Operation

18

Operation

You can load and eject a disc (as described below) only when the CRW2200UX 

drive is turned on.

1

1

1

1 Open the disc tray by pressing the eject button on the CRW2200UX 

drive’s front panel.

2

2

2

2 Place the disc onto the disc tray with its label or printing facing upward, 

or remove the disc from the disc tray.

3

3

3

3 Close the disc tray by pressing the eject button again. You can also 

gently push it closed.

Load or unload the disc after the disc tray has fully opened. Do not push 

or pull the disc tray using excessive force. Doing so can damage the drive 

or the disc.

Note

The disc tray does not open while a disc is being read or written.

Loading/Ejecting a Disc

1

2