Yamaha CRX-E150 Owner's Manual - page 6
2
CAUTIONS
1
To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2
Install this unit in a well ventilated, cool, dry, and clean
place with at least 10 cm above, behind and on both
sides of this unit - away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
3
Position this unit away from other electrical appliances,
motors and transformers to avoid humming sounds, do
not place this unit where it may get exposed to rain or
any kind of liquid to prevent fire or electrical shock.
4
Avoid extreme temperature swings or excessive use of
humidifier in the room where this unit is installed to
prevent condensation inside this unit, which may cause
an electrical shock, fire damage to this unit, and/or
personal injury.
5
Do not cover this unit with a newspaper, a tablecloth, a
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit and/or personal injury.
6
Avoid installing this unit in a place where foreign
objects and liquid might fall. It might cause a fire,
damage to this unit and/or personal injury. Do not place
the following objects on this unit:
• Other components, as they may cause damage and/or
discoloration on the surface of this unit.
• Burning objects (i.e., candles), as they may cause fire,
damage to this unit and/or personal injury.
• Containers with liquid in them, as they may cause an
electrical shock to the user and/or damage to this unit.
7
Be sure to place this unit on a level surface. If not so,
this unit will fail to work normally and cause damage to
the disc(s) and this unit itself.
8
Do not use force on switches, controls or connection
cables. Never pull the cables when disconnecting them.
9
Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is
dangerous and may result in fire or other accidents.
YAMAHA will not be held responsible for any damage
resulting from the use of this unit with a voltage other
than that specified.
10
Do not attempt to clean this unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
11
Disconnect the power cord from the wall outlet when
not planning to use this unit for a long period of time, or
during an electrical storm, as they may cause damage by
lightning.
12
Do not attempt to modify or fix this unit. Contact the
qualified YAMAHA service personnel when any service
is needed. Cabinet should never be opened for any
reasons.
13
Be sure to read “Troubleshooting” section regarding
common operating errors before concluding that this
unit is faulty.
PRECAUTIONS: READ THIS BEFORE OPERATING THIS UNIT
The unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off. This state is called the standby
mode. In this state, this unit is designed to consume a
very small quantity of power.
CAUTION FOR CARRYING THE UNIT
Before carrying the unit, first remove all discs from
the unit, press STANDBY/ON to turn the unit off,
then disconnect the AC power plug from the wall
outlet.
VOLTAGE SELECTOR (General model
only)
The voltage selector (on the rear panel of this unit)
must be correctly set to the voltage used locally
before making any connection to the AC power
supply.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug
to wide slot and fully insert.
This Class B digital apparatus complies with
Canadian ICES-003.
This compact disc
player is classified as a
CLASS 1 LASER
product.
The CLASS 1 LASER
PRODUCT label is
located on the rear
exterior.
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT