Yamaha DISKLAVIER ENSPIRE CL Owner's Manual - Important Precautions
ii
Read the following before operating the Disklavier.
■ Warnings
•
Do not locate the Disklavier in a place subject to
excessive heat, low temperatures, or direct
sunlight. This could be a fire hazard and may
damage the finish and internal parts.
•
Excessive humidity or dust can lead to fire or
electric shock.
•
Connect the plug on the Disklavier power cable
to a compatible AC outlet. Failure to do so will
present a fire and electric shock hazard. If the
power cable plug is not compatible with your AC
outlet, consult your dealer.
•
Do not plug several devices into the same AC
outlet. This can overload the AC outlet, and lead
to a fire and electric shock hazard. It may also
affect the performance of some devices.
•
Do not place heavy objects on the power cable. A
damaged power cable is a potential fire and
electric shock hazard. If the power cable runs
under a carpet, make sure heavy objects, including
the Disklavier, are not placed on top of the cable.
•
If the power cable is damaged (i.e. cut or a bare
wire is exposed), ask your dealer for a
replacement. Using the Disklavier in this
condition is a fire and shock hazard.
•
When disconnecting the power cable from an
AC outlet, always pull from the plug. Never pull
the cable. Damaging the cable in this way is a
potential fire and electric shock hazard.
•
The cover of the unit should be removed only by
qualified service technicians.
•
Do not place liquid containers such as vases,
potted plants, glasses, cosmetic bottles,
medicines, etc., on top of the Disklavier.
•
Do not try to modify the Disklavier, as this could
lead to a fire or electric shock hazard.
•
When moving the Disklavier to another location,
turn off the power, remove the power plug from
the AC outlet, and remove all cables connected
to external devices.
■ Cautions
•
Turn off all audio devices when connecting to
the Disklavier. Refer to the user’s guide for each
device. Use the correct cables and connect as
specified.
•
Set the volume level on all the devices to
minimum before applying power.
•
Do not play the Disklavier at a high volume for
extended periods; you may damage your
hearing. This is especially important when using
headphones. If you think your hearing ability is
impaired, consult your doctor.
•
If the Disklavier is overexposed to high amounts
of stress — caused by the prolonged playback of
extreme concentrations of data — the Disklavier’s
thermal relay may trip. The thermal relay will
automatically reset when the Disklavier has
cooled down.
•
If you notice any abnormality — such as smoke,
odor, or noise — turn off the Disklavier
immediately, and remove the power plug from
the AC outlet. Consult your dealer for repair.
•
If a foreign object or water gets inside the
Disklavier turn it off immediately, and remove the
power plug from the AC outlet. Consult your dealer.
•
If you plan not to use the Disklavier for a long
period of time (such as when you are on
vacation), disconnect the instrument from the
power outlets.
•
Always remove the power plug from the AC
outlet before cleaning the Disklavier. Leaving the
power plug connected presents a risk of electric
shock.
•
Do not use benzene, thinner, cleaning
detergent, or a chemical cloth to clean the
Disklavier.
•
Do not place metal objects with rubber feet on
top of the Disklavier. The color and finish of the
Disklavier can be damaged.
•
Do not place heavy objects on the Disklavier.
Doing so can damage the Disklavier.
•
Use a soft, dry cloth to clean the Disklavier.
However, if you discover a stain, carefully use a
soft damp cloth to remove it.
■ Interference
•
The Disklavier uses high-frequency digital
circuits that may cause interference to radios
and TVs placed close to it. If interference does
occur, relocate the affected equipment.
Please keep this manual for future reference.