Yamaha DM2000 V2 Short Cut List - Other Short-Cuts
Other Short-Cuts
1. EQ Gain to 0dB
To reset the gain of an EQ band to 0dB, press and hold the Freq/Q encoder for one
second.
2. EQ Reset
To return the whole Parametric EQ for a channel to its default settings, press the
Freq/Q encoders for the LOW and HIGH bands at the same time.
3. AUX ON/OFF
To access the AUX ON/OFF switches quickly, press and hold the required AUX
SELECT switch. Then the CHANNEL ON switches above the faders become the
AUX ON switches for the selected Aux.
TIP
This can be useful for creating a MIX-MINUS. First set an AUX to ALL
NOMINAL, using the switch at the top of the SEND1-24 page in the AUX
DISPLAY menu, then hold the AUX SELECT switch to switch off the send
for the required ‘minus’ channel.
4. AUX SOLO
To solo an AUX MASTER while still viewing an INPUT FADER LAYER, press the
required AUX SELECT switch once to select it, and once again to SOLO it. Pressing
a third time will cancel the SOLO. While the AUX is in SOLO, its SELECT switch will
flash.
NOTE
This function can be disabled in the SOLO page of the MONITOR menu,
with the AUX/SOLO LINK option.