Yamaha DME-N Installation Manual - page 9
Other manuals for DME-N:
Setup Manual, Installation Manual, Installation Manual, Installation Manual
Manual is about: Yamaha Musical Instrument Owner's Manual
of
11
DME-N Network Driver Installation Guide for LS9
9
6
Click [Advanced...], then [Properties] on the [Options] tab.
The “TCP/IP Filtering” dialog will be displayed.
7
Select “Permit All” for TCP Ports, then click [OK].
The display returns to the “Advanced TCP/IP Settings” dialog. Click [OK] to return to the “Internet Protocol
(TCP/IP) Properties” dialog.
8
Click [Use the following IP address] on the [General] tab.
9
Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway],
and “255.255.255.0” into [Subnet mask].
n
When installing on the same subnet as the DME unit(s), set the gateway’s host address to 254.
10
Click [OK].
11
Restart your computer.