Yamaha DS2416 Setup Manual - page 7
Other manuals for DS2416:
Owner's Manual, Owner's Manual
Manual is about: Digital Mixing Card
of
10
Spirit Digital 328 v2
6
Configuring DS2416 S/PDIF I/O
Click on the ‘Master & InPatch #1’ tab and activate the S/PDIF inputs by clicking both S/PDIF
switches:
The pan controls should also be panned hard left and right and the Stereo output activated:
The 328 SPDIF output will then be routed into the DS2416 card available for hard disk recording
and the output will be routed to the 328 input as selected on page 3.
Do not close the DS2416 Patch application as the card’s clock will
revert to its default internal state.
NOTE
If using the
patch.exe application alone (ie without an application such
as
C-Console), it must also be used to activate the DS2416 S/PDIF
input.
NOTE