Yamaha DTX500 Owner's Manual - page 32
7 Create Your Own Original Drum Kit
32
DTX500 Owner’s Manual
24
Set the Program Change and Bank Select
When a Drum Kit is selected, this function sets the MIDI Pro-
gram Change Number and the Bank Select MSB and LSB
that will be transmitted. This can be set for each MIDI chan-
nel.
By transmitting a program change message, you can have the
voice of an external MIDI device automatically change when
switching the Drum Kit on the DTX500.
* The
˙
/
¶
indication is not shown in the upper right corner of
the display.
Use the [
>
] button to call up the KIT24 page, then rotate the
jog dial to make the following settings.
* When the Program Change Transmit On/Off is set to “
off
,”
values for PC, M and L will be “
---
” and the settings cannot
be made.
●
MIDI Channel
1
–
16
............... Target MIDI channel for the Program Change
●
Program Change Transmit On/Off
on
................... Transmits.
off
................. Does not transmit.
●
Program Change Number
001
–
128
....... Transmitted program change number.
●
Bank Select MSB, LSB
000
–
127
....... Bank select MSB number, LSB number
* For more information on Bank Select MSB and LSB, refer to
the Voice List and MIDI Data Format documents, etc. of the
particular external MIDI device you are using.
25
Set MIDI Volume and Pan—Control
Change
This function sets the MIDI Control Change Volume and Pan
values that will be transmitted when a Drum Kit is selected.
This can be set independently for each MIDI channel.
This lets you automatically change the voice Volume and Pan
on an external MIDI device when you switch the Drum Kit of
the DTX500.
* The
˙
/
¶
indication is not shown in the upper right corner of
the display.
Use the [
>
] button to call up the KIT25 page, then rotate the
jog dial to make the following settings.
* When the Control Change Transmit On/Off is set to “
off
,”
values for Vol and Pan will show “
---
” and the settings can-
not be made.
●
MIDI Channel
1
–
16
...............Target MIDI channel for Control Change
messages
●
Control Change Transmit On/Off
on
....................Transmits.
off
.................Does not transmit.
●
Volume
0
–
127
.............Sets the Volume Control Change data value
that will be transmitted.
●
Pan
0
–
127
.............Sets the Pan Control Change data value that
will be transmitted.
26
Save the Original Voice
To save the Drum Voice you created, use the Store operation
described below and save it to the DTX500’s memory. Origi-
nal kits can be saved as a Drum Kit to the User Drum Kit
(51–70) memory locations.
26-1.
Press the [SAVE/ENTER] button. The following dis-
play will appear.
26-2.
Rotate the jog dial to select the destination user Drum
Kit number (51–70) that you want to store.
* Data cannot be stored to the Preset Drum Kits (1–50).
* You can save data to a User Drum Kit number that
already contains data. However, be careful when
doing this, since the previous data will be overwritten
with the new data.
KIT24*PC
~
Ch1=on
”PC003
~
M000L003‚
Program Change Number
Bank Select MSB
Program Change
Transmit On/Off
MIDI Channel
Bank Select LSB
• If you select a different Drum Kit before performing the
Store operation, all changes you have made to the data
will be lost. If you want to keep settings or changes, make
sure to perform the Store operation.
KIT25*CC
~
Ch1=on
”Vol=127
~
Pan=
~
64
Control Change
Transmit On/Off
MIDI Channel
Volume
Pan
NOTICE
Edited Drum Kit name
KIT
~
save
~
to
~
51
:[Oak
~
Custom
~~
]
Store destination