Yamaha Electone EL-27 Owner's Manual - Voice Condition - Page 1

26

3 Voice Controls and Effects

Press the PAGE button to return to the Page 1.

Voice Condition - Page 1

●

Touch Tone

The Touch Tone function gives you expressive control over the volume and timbre of a voice. 

TOUCH (Touch Tone)

The depth of Touch Tone is switchable alternately to 1 (Shallow) or 4 (Deep)

by pressing the DATA CONTROL button found in the bottom left to the LCD

display. 4 is the factory setting.

The Touch Tone cannot be applied to the pedal voices.

Press the PAGE buttons to select the Page 2.

Voice Condition - Page 2

●

Feet

FEET

Determines the octave setting of the voice. PRE. (Preset) is the original

(factory) setting; 4' is the highest and 16' is the lowest.

Settings: PRE., 4', 8', 16'

           ¡2

FEET=PRE.  SYM.=PRE.

PAGE

PRE.

  4'

  8'

 16'

Selects next setting.

Selects previous setting.

          ¡1

             VOL.=10

           ¡1

  TOUCH=4    VOL.=24

PAGE

1

4

The Touch Tone function

provides initial/after touch

response over the voices, controlling

volume and timbre according to the

velocity at/after which you strike the

keys.

The set values 1 and 4 are

the same as the ones found

in the upper models, respectively.

The Touch Tone does not

function to Organ Voice. The

after touch does not function to the

percussive voices (Piano, etc.).

By using different Feet

settings in the Lower and

Upper keyboards, you can duplicate

the wide octave range of many

instruments. For example, with both

the Lower and Upper keyboards set to

the Piano voice and Feet set to

appropriate values, you can play the

voice nearly over the full range of a

grand piano.