Yamaha Electone EL-27 Owner's Manual - page 51
About the User Registration shift:
The USER mode lets you use the User Registration Shift settings created by the other types of Electones,
such as EL-37.
1.
Create the User Registration Shift data with the EL-37
and save it to a floppy disk as a part of the registration
data.
2.
Insert the floppy disk into the M.D.R. slot of the EL-27.
Call up the registration, to load the data to the USER.
3.
Select USER in the Registration Shift Page.
In the USER mode, each press of the right footswitch selects registrations
according to the predetermined order. The current position is indicated by
the cursor, which can be moved along the registration row.
Resetting the Registration Memory Buttons (Power On Reset):
All current data including the registrations can be deleted at once by using the Power On Reset function.
To do this:
1.
Turn off the Electone.
2.
While holding down the top left DATA CONTROL
button, turn the power back on.
Be careful when using this operation, since it erases all your existing data.
Always save your important data to a floppy disk using M.D.R.(See page 58.)
T12314545454541 •••E
Moves the cursor.
one step to the left.
Cursor
Moves the cursor to E (End).
Moves the cursor to T (Top).
Moves the cursor.
one step to the right.
Moves the cursor to E (End).
Moves the cursor to T (Top).
49
5 Registration Memory
The registration numbers
higher than 6, set by the other
Electones, will be displayed by "X" to
indicate the numbers are ineffective.
POWER