Yamaha Electone EL-87 Owner's Manual - page 127

123

  N O T E :

Any rhythm currently playing will

automatically be stopped when you call

up the Rhythm Sequence Program

function.  Also, use of the Music Disk

Recorder function automatically cancels

Rhythm Sequence operations.

  NOTE:

When you select one of the sequences

in this step, any editing done to that

sequence is instantly and automatically

saved.  This means that if you select a

sequence that is already programmed,

any editing you do will permanently

change the sequence and the original

sequence cannot be recovered.

2

Rhythm Sequence Program

With the Rhythm Sequence Program function, you can connect

any of the Electone’s existing rhythms and the rhythms of your

own creation together to make complete rhythm compositions.  You

can save four rhythm compositions to the Sequence buttons on the

panel for future recall.

(1) Selecting a Sequence

1

Press the SEQUENCE button in the DISPLAY SELECT

section.

The LEDs of the numbered Sequence buttons in the Rhythm

section on the panel will flash and the following display will

prompt you to select a sequence number.

2

Press one of the Sequence buttons to call up the Rhythm

Sequence display.

In this display, different rhythms (both Preset rhythms and User

rhythms that you created with the Rhythm Pattern Program)

can be entered in sequence along the pattern row in the middle

of the display.  Entered patterns are shown in boxes, while the

numbers in the row above indicate the position.

Up to three-character code inside each box indicates the type

and number of the rhythm.  The preset rhythms of the Electone

are indicated by a two-digit number (i.e., [05] or [16]).  User

patterns are indicated by the “U” prefix as well as a letter suffix

representing the type-A,B,C,D, and F (Fill In).  Examples of

these include [U3C] and [U8F].  The preset patterns also may

have a letter suffix: “I” indicates Intro, “F” indicates Fill In, and

“E” indicates Ending (i.e., [01I], [20F], and [16E]).