Yamaha EMX3500 Operation Manual - page 12

10

L

R

SPEAKER 2

L

R

SPEAKER 1

POWER

W

X

Rear Panel

W POWER switch

This switch turns the EMX3500’s power supply on and

off. The VU meters on the front panel will light when the

power is on.

X SPEAKER jacks

These standard 1/4" phone jacks are the main

speaker-level outputs from the EMX3500’s power

amplifier. The EMX3500 provides two pairs of stereo

speaker output jacks, labeled SPEAKER 1 and

SPEAKER 2. The SPEAKER 1 and SPEAKER 2 jacks

for each output channel (right and left) are wired in

parallel. If you connect a speaker system to only one of

the jacks (SPEAKER 1 or SPEAKER 2), the total load

impedance of the speaker system may be as low as

4

Ω. If you plug speakers into both the SPEAKER 1 and

SPEAKER 2 jacks of either channel, the load imped-

ance of each speaker system must be no less than 8

Ω.