Yamaha Grizzly 700 FI Owner's Manual - page 107
Other manuals for Grizzly 700 FI:
Owner's Manual, Owner's Manual
Manual is about: YFM7FGPY
of
170
8-27
8
3. If the oil is below the brim of the check hole,
remove the final gear oil filler bolt and its gas-
ket, and then add sufficient oil of the recom-
mended type to raise it to the correct level.
4. Check the gaskets for damage, and replace
them if necessary.
5. Install the oil level check bolt, the oil filler bolt
and their gasket, and then tighten the bolts to
the specified torques.
1. Final gear oil
2. Gasket
3. Final gear oil level check bolt
4. Correct oil level
1
2
4
3
1. Final gear oil filler bolt
2. Gasket
Tightening torques:
Final gear oil level check bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
1
2
U43P12E0.book Page 27 Monday, July 13, 2009 5:26 PM