Yamaha Grizzly 700 FI Owner's Manual - page 99
Other manuals for Grizzly 700 FI:
Owner's Manual, Owner's Manual
Manual is about: YFM7FGPY
of
170
8-19
8
To install the panel
1. Place the panel in the original position, and
then install the quick fasteners.
2. Install the rear carrier by installing the bolts
and tightening them to the specified torques.
3. Install the seat.
1. Panel I
2. Quick fastener
Tightening torques:
Carrier bolt (upper):
53 Nm (5.3 m·kgf, 38 ft·lbf)
Carrier bolt (lower):
53 Nm (5.3 m·kgf, 38 ft·lbf)
Carrier bolt (under the fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
U43P12E0.book Page 19 Monday, July 13, 2009 5:26 PM