Yamaha HTR-6040 Service Manual

SERVICE  MANUAL

1 0 1 0 4 8

IMPORTANT NOTICE

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.

It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already

known and understood by the users, and have therefore not been restated.

WARNING:

Failure to follow appropriate service and safety procedures when servicing this product may result in personal

injury, destruction of expensive components, and failure of the product to perform as specified.  For these reasons,

we advise all YAMAHA product owners that any service required should be performed by an authorized

YAMAHA Retailer or the appointed service representative.

IMPORTANT:

The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or

recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover.  The research, engineering, and

service departments of YAMAHA are continually striving to improve YAMAHA products.  Modifications are, therefore, inevitable

and specifications are subject to change without notice or obligation to retrofit.  Should any discrepancy appear to exist, please

contact the distributor's Service Division.

WARNING:

Static discharges can destroy expensive components.  Discharge any static electricity your body may have

accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).

IMPORTANT:

Turn the unit OFF during disassembly and part replacement.  Recheck all work before you apply power to the unit.

■ CONTENTS

TO SERVICE PERSONNEL .......................................... 2

FRONT PANELS ............................................................ 3

REAR PANELS .......................................................... 4–5

REMOTE CONTROL PANELS ...................................... 6

SPECIFICATIONS ...................................................... 7–9

INTERNAL VIEW ......................................................... 10

DISASSEMBLY PROCEDURES ........................... 10–12

UPDATING FIRMWARE ........................................ 13–14

SELF DIAGNOSIS FUNCTION (DIAG) ................. 15–29

DISPLAY DATA ..................................................... 30–31

IC DATA ................................................................. 32–47

BLOCK DIAGRAMS .............................................. 49–50

PIN CONNECTION DIAGRAMS .................................. 51

PRINTED CIRCUIT BOARDS ................................ 52–66

SCHEMATIC DIAGRAMS ...................................... 67–80

REPLACEMENT PARTS LIST .............................. 81–91

REMOTE CONTROL .............................................. 92–93

Advanced setup ........................................................... 94

P.O.Box 1, Hamamatsu, Japan

 2007                                         All rights reserved.

This manual is copyrighted by YAMAHA and may not be copied or

redistributed either in print or electronically without permission.

 '07.07

RX-V461/HTR-6040/

RX-V461DAB

This service manual is the RX-V461/HTR-6040/RX-V461DAB (T, B, G and E models).

For the RX-V461/HTR-6040/DSP-AX461 (U, C, R, K, A, L and J models) service manual, please refer to the

following service manual:

RX-V461/HTR-6040/DSP-AX461 (U, C, R, K, A, L and J models):   101041

For T, B, G and E models

AV RECEIVER

RX-V461/HTR-6040/

RX-V461DAB