Yamaha KODIAK 450 Owner's Manual - page 123
Other manuals for KODIAK 450:
Owner's Manual
of
190
8-10
To install
1. Place the panel in the original position
and install the quick fasteners.
2. Place the carrier in the original position
and install the carrier bolts under the
fenders.
3. Install the top carrier bolts, and then tight-
en all bolts to the specified torques.
EBU01013
Panel E
To remove
Remove the bolts, and then take the panel off.
To install
Place the panel in the original position, and
then install the bolts.
1. Panel E
2. Bolt (
× 3)
Tightening torque:
Carrier bolt (top):
34 Nm (3.4 m·kgf, 25 ft·lbf)
Carrier bolt (under fenders):
7 Nm (0.7 m·kgf, 5 ft·lbf)
U5ND11.book Page 10 Wednesday, April 30, 2003 1:52 PM