- DL manuals
- Yamaha
- Minidisc Recorder
- MDX-595
- Owner's Manual
Yamaha MDX-595 Owner's Manual
Summary of MDX-595
Page 1
U mdx-595 natural sound minidisc recorder lecteur enregistreur minidisc owner’s manual mode d’emploi.
Page 2: Safety Instructions
Safety instructions 9 heat — the unit should be situated away from heat sources such as radiators, stoves, or other units that produce heat. 10 power sources — the unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 11 power-c...
Page 3
1. Important notice: do not modify this unit! This product, when installed as indicated in the instructions contained in this manual, meets fcc requirements. Modifications not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. Important: when connecting ...
Page 4: Important
2 caution: read this before operating your unit. 1. This unit is a sophisticated mini disc recorder. To ensure proper operation for the best possible performance, please read this manual carefully. 2. Install your unit in a cool, dry, clean place with good ventilation. Avoid placing it in direct sun...
Page 5: Contents
3 english contents features ¶ a sampling rate converter that lets you make digital recordings from 32 khz (dat, etc.) , 44.1 khz (cd, dat, md, etc.) and 48 khz (dat, etc.) program sources. ¶ editing features (move, erase, divide, combine, title, and undo) that let you take full advantage of the md r...
Page 6: Part Descriptions
4 part descriptions front panel #˜* & rec ) eject power 0 10 0 10 random s/f repeat a–b display scroll title chara. Delete edit set cancel enter rec level phones level input ! Search ⁄ + › – $ timer off play rec natural sound minidisc recorder mdx–595 $ › % fi ^ fl & ‡ * ° ( · ‚ ) _ — Ÿ ! ⁄ @ ¤ # ‹ ...
Page 7
5 english front panel ~ power (8) press to turn the unit on or off. Ÿ disc insertion slot insert the disc into this slot. ! ) eject press to remove the disc. If the toc* data has not yet been written, it is written automatically before the disc is ejected. ⁄ remote control sensor (26) receives the s...
Page 8
6 remote control see the pages in parenthesis for details regarding operation. Fi scroll (9) press to scroll the disc (track) title across the display. Press while scrolling to pause the scroll. Press and hold to scroll rapidly. ^ number (23) press before pressing a number button to input a number d...
Page 9: Connections
7 english digital out optical digital in digital out optical optical l l r r digital optical out 1 2 analog in out (play) (rec) 3 4 in l l r r play rec 3 4 l r digital optical out 1 2 analog in out (play) (rec) 3 4 in • connections should be made to the correct input/output terminals on the other co...
Page 10: Playback
8 playback preparations • be sure to set the timer switch to off, then press power to turn this unit on. • set your amplifier or receiver to md. To stop press & ( stop & on the remote). To pause press # / * ( pause * on the remote). Press again to resume playback (or press play # on the remote). To ...
Page 11
9 english 2 time remaining on the md (only for recordable mds) 3 disc title during playback press display repeatedly to display the following information. 1 current track number and elapsed time 2 time remaining on the current track 3 track title if the track has not been given a name, “no title” is...
Page 12
10 random play you can have the unit play all the tracks on a disc in random order. To start random playback press random ( rndm on the remote). The random indicator lights up and “random search” appears in the display while the unit selects a track. Playback starts automatically. To cancel press ra...
Page 13
11 english repeat a -bsf repeat a-b sf program play this function lets you enjoy listening to your favorite tracks in any order you desire. 1 press stop & to stop playback. 2 press prog to light up the program indicator. 3 program the desired track by pressing the corresponding numeric buttons. Exam...
Page 14
12 to check the programmed data 1 stop or pause program playback. 2 press skip $ or › to skip through the step information (or use the jog dial on the front panel). To delete a specific step 1 stop program playback. 2 press skip $ or › to skip through the step information (or use the jog dial on the...
Page 15: Recording
13 english recording this unit allows you to make recordings from a wide variety of program sources (both analog and digital). When recording an analog source (such as an lp or cassette) this unit converts the analog signals to a 44.1 khz digital signal before recording them onto the md. When record...
Page 16
14 4 press rec ( rec ‡ on the remote) to set this unit to record pause mode. The rec * indicators light up. “rec standby” and the amount of time available for recording flash alternately in the display. If you selected a track number or paused playback (in step 3) to record over a previous recording...
Page 17
15 english time rescue recording the time rescue ( time ) recording function allows you to start recording six seconds before you press record. During record pause mode, the md recorder monitors the input signal and continuously maintains a six second memory “cache”. Therefore, you can record a song...
Page 18
16 monaural recording recording in monaural (mono) allows you to record up to 148 minutes of sound on one 74 minute md. (when recording in stereo you can record up to 74 minutes of sound.) this may be useful when recording an interview, debate, or whenever you want to record for a long time on one d...
Page 19
17 english monitor out when a disc is not loaded, you can use the monitor out function to monitor the sound of the input source. This allows you to enjoy better sound from your other digital source components, such as cd, by using this unit as a digital to analog converter. 1 press ) eject to remove...
Page 20: Editing
18 editing move this function lets you change the position of any track. First, select the track you want to move, then specify the track number you want to move it to. After the move, the tracks located between the old and new positions are renumbered automatically. You can perform this operation r...
Page 21
19 english erase the ability to erase sound without having to re-record is another convenient function. You can erase the entire disc, a single track, or just part of a track. Disc erase this operation lets you erase all audio and title (character) data to create a blank md. Please note that once er...
Page 22
20 part erase this operation lets you erase part of a track. 1 press # / * to play the track containing the part you want to erase. 2 use search ! Or ⁄ to locate the beginning of the part you want to erase (point a), then press # / * to pause at that point. 3 press edit repeatedly to display “a–b er...
Page 23
21 english combine this function lets you combine two consecutive tracks into one. After you combine the tracks, the total number of tracks decreases by one and the tracks following the combined tracks are renumbered. 1 press & to stop playback. 2 turn the jog dial to select the second track of the ...
Page 24
22 disc maintenance this unit features two disc maintenance functions which optimize performance of your md discs. The toc write function allows you to write any edits to the toc without having to eject the disc. The fra check function recovers recordable space on a disc that may have been lost beca...
Page 25: Titling
23 english this function lets you title recorded mds and the individual tracks. Titles may consist of uppercase and lowercase letters, numbers, and symbols for a maximum of up to 250 characters for each title. Titling 1 to title a disc press & ( stop & on the remote) to stop playback. To title a tra...
Page 26: Timer Operations
24 with a commercially available audio timer, it is possible to make recordings and initiate playback automatically at any time. Make sure that all power cord connections between the timer and amplifier/receiver are properly made. For details, refer to the instructions of your audio timer. No change...
Page 27: Md System Limitations
25 english md system limitations the recording system in your md recorder is radically different from those used in cassette and dat decks and is characterized by the limitations described below. Note, however, that these limitations are inherent to the md recording system and are not a result of me...
Page 28: Copy Protection (Scms)
26 copy protection (scms) as a digital audio component, this md recorder conforms with the serial copy management system (scms) standards. The serial copy management system restricts copies made by recording digital signals to first-generation copies only. Therefore, an md recorded through a digital...
Page 29: Troubleshooting
27 english troubleshooting if your md recorder fails to operate normally, check the following table. It lists common operating errors and simple measures which you can take to correct the problem. If it cannot be corrected, or the symptom is not listed, disconnect the recorder’s power cord and conta...
Page 30: Display Messages
28 can’t copy digital recording cannot be performed. (see “copy protection (scms)” on page 26.) can’t edit edit operations are not possible. Can’t play! Timer playback is not possible. The loaded disc may be blank, damaged, or an incompatible format. Can’t rec! Timer recording is not possible. The l...
Page 31: Specifications
29 english specifications inputs line in (rec) type: pin jack standard input level (56 k-ohms): 300 mv digital in (optical) (2) type: square optical connector jack outputs line out (rec) type: pin jack standard output level (1 khz, 0 db): 2.0 ± 0.5 vrms digital out (optical) type: square optical con...
Page 32
60 yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr. 22-34, 25462 rellingen bei hamburg, f.R. Of germany yamaha electronique france ...