Yamaha MDX-595 Owner's Manual - page 18
16
MONAURAL RECORDING
Recording in monaural (mono) allows you to record up to
148 minutes of sound on one 74 minute MD. (When
recording in stereo you can record up to 74 minutes of
sound.) This may be useful when recording an interview,
debate, or whenever you want to record for a long time on
one disc.
1
Press
INPUT
repeatedly to select the input
connected to the sound source you want to
record.
2
Locate the point where you want to start
recording.
3
Press
MONO/ST
to light the MONO indicator.
4
Press
REC
‡.
The REC
* indicators light up.
“REC Standby” and the amount of time available for recording
flash alternately in the display.
To adjust the recording level of digital or analog input
sources, see “Adjusting Recording Levels” on page 14.
5
Press
PLAY
# to start recording.
CHAR.
TITLE
SET
DELETE
NUMBER
⁄
SEARCH
!
INPUT
›
SKIP
$
PAUSE
*
PLAY
‹
REC
?
STOP
&
s
MDX
CD-P
REC
SYNC
TIME
M-MARK MONO/ST
3
4
5
1
SYNCHRO RECORDING
The synchronized recording function lets you set this unit
to start recording automatically when a sound signal is
input. When operating this unit in combination with a
remote controllable Yamaha CD player, you can use the
CD-P button on this unit’s remote control to start playback
from the CD player.
1
Load the sound source into the source
component.
If necessary, program, or select the track you want to
start recording from before proceeding to the next
step. (Refer to the operation manual supplied with the
source component for instructions regarding its use.)
2
Press
INPUT
repeatedly to select the input
connected to the sound source you want to
record.
3
Locate the point where you want to start
recording.
4
Press
SYNC
to set this unit to record pause
mode.
The REC
* indicators light up.
“Synchro REC” and the amount of time available for recording
flash alternately in the display.
During synchronized recording, analog input sources are
recorded at the current
ANALOG REC LEVEL
setting, digital
sources are recorded at the 0 dB level.
5
Start playing the sound source. (Press
CD-P
if
recording from a Yamaha CD player.)
The MD starts recording automatically when a sound signal is
input. When the sound signal stops, the unit switches back to
record pause mode and “Synchro REC” blinks in the display.
6
To continue recording, repeat step 5.
When you have finished recording, press
& on
this unit to cancel the record pause mode.
Note
When the signals at the beginning of a track are at a lower level
than the level required to start synchronized recording, they are
not recorded. Should this occur, perform manual recording.
5
2
4
CHAR.
TITLE
SET
DELETE
NUMBER
⁄
SEARCH
!
INPUT
›
SKIP
$
PAUSE
*
PLAY
‹
REC
?
STOP
&
s
MDX
CD-P
REC
SYNC
TIME
M-MARK MONO/ST